Air Fuel Ratio Gauge

[mckenzie]

Im kind of stuck here. I have got power etc. to the gauge but Im stuck on which wire to tap into on the ecu. I have had a look on here and found a few diagrams but they dont make much sense or I may just be being thick. Its a Nreg Glanzav. Im told its the oxygen wire I need to tap into but my ecu plugs dont look like the diagrams. I can only find a 26 pin and a 12 pin plug. Any help would be much apprechiated.

Thanks

 

[glanzanut]

its not the ecu you wire it into bud its the lambda sensor which is situated on the exhaust near the turbo that you wire it to. :freddy:

 

[gt-stu]

yeah you can wire it through the bulkhead into the 02 sensor but that looks rough.

you wire it to the ecu signal wire looks much better,i no the exact one on ep82 but glanza has a 3 plug ecu not to sure what wire it is.

take the live and earth from cig lighter if the ecu wire are getting cluttered with fcd's/sld's etc

 

[TRD]

You CAN wire it to the ECU....purple wire

 

[Sheldon]

here is a pic of a glanza ecu plug so someone can show him wich wire he needs to plug his a/f guage

 

[BallıGee]

heres some help for u http://www.toyotagtturbo.com/forums/showthread.php?t=20491

 

[Sheldon]

heres some help for u http://www.toyotagtturbo.com/forums/showthread.php?t=20491

oh.. seems that its number 6 on the 16pin plugs so the pic i gaveis useless

 

[saddler]

buy a wideband AFR ,,,

 

[Sheldon]

buy a wideband AFR ,,,

with no offence.. but you know how much can he afford? or if he wants an A/F guage just for the looks? i hate comments like these.

 

[supernova]

Well heres the pin diagram for the glanza, not sure which one it is though...

 

[TRD]

Connector 2 Number 6?????