just got round to fitting the anti-lift kit ,
they supply longer 8mm bolts / washers .. but the bolts removed are 10mm
so the new ones are just loose in the old bolt holes. nothing to screw into
do I just use my old bolts ? very strange, unless there is a different ep82/ep91 kit..
thanks guys.
they supply longer 8mm bolts / washers .. but the bolts removed are 10mm
so the new ones are just loose in the old bolt holes. nothing to screw into
do I just use my old bolts ? very strange, unless there is a different ep82/ep91 kit..
thanks guys.
Last edited: