hi basicly i have a 1998 glanza v which i have just done a manual conversion to which i took the engine out to do as i had other parts to fit so was easier to take the engine completely out, basicly i have everything hooked back up now and i have bridged the wire from the big plug on the autobox so that the car now turns over but wont start, the car isnt sparking and fuel came out the rail when i loosened the nut and turnd the key, but spark plugs were dry. also when the car is turning over it is slower than before and there seems to be a strain on the starter motor, when jump leads are on the car it turns faster but the noise is still there,
i have checked all fuses, checked earths aswell.
still using the auto tps, and auto starter motor
any help appreciated!
i have checked all fuses, checked earths aswell.
still using the auto tps, and auto starter motor
any help appreciated!