Avcr Instalation Help

[Casper]

hi Guys,

can anybody give me diagram for installing the Apexi AVCR soldnid ??

 

[fur]

Clicky

there ya go, leave rep

 

[Casper]

Clicky

there ya go, leave rep

thanks mate.. but actually i did the wiring stuff. but i didnt find instruction to how to install the solniod of boost ... i mean how to install stuff inside hood with turbo ?

 

[Casper]

help please !~

 

[weeJohn]

Here is the connection diagram as in the Instruction manual.

Do you have the instruction manual? This is not the sort of thing you can wing it on the settings on, its complicated to set up even with the instruction manual.

There is nothing starlet specific in it, just keep the valve as close to the turbo as you can to keep the hoses short for better response from the valve.

Connect up the rpm signal as advised before, you will need it to make the gear calculation easily and accurately.

You can put a male push in bullet connector on the purple wire, and a female on each of the rpm and injector wires at the ecu. That means you can easily change from 1 to the other if you want.