bee r rev limiter help

[chrisEP82]

hi there i have just got a bee r rev limiter and wired it in as the diagram on the fourm and spliced into the ECU and iam not sure if i havent done it right but seems to not be working it will cut somtimes but sounds like its not cutting the ignition propoly any help woul be grate and what wire is cut on the bee r
thanks chris

 

[lingl9z]

hi there i have just got a bee r rev limiter and wired it in as the diagram on the fourm and spliced into the ECU and iam not sure if i havent done it right but seems to not be working it will cut somtimes but sounds like its not cutting the ignition propoly any help woul be grate and what wire is cut on the bee r
thanks chris

From what i've heard these are really bad to use! i think fishys engine blew a few days after installing!

 

[chrisEP82]

thanks for the advice mate i only got it for the launch realy just trying to get it working do you know how his engine went bang

 

[Bazza]

i really wanted one of these but was told to stay away these are supposed to put the engine under lots of unneeded pressure!!!

just be carefull dont use it all the time thats what makes engines go bang!!:shoot:

 

[Toby@ToyTuning.com]

Not this again!

BeeR's don't kill engines, they just don't work well on Starlet ECU's. Give me one sec let me find the thread.

T

 

[Toby@ToyTuning.com]

http://www.toyotagtturbo.com/forums/showthread.php?t=33745&highlight=light

They only really kill engines as most will alter driving style once installed, making the limiter a happy place to be

T

 

[chrisEP82]

thanks for the advice thats what i heard most cases of engines going bang where driver abuse or somthing else.

 

[GTnomez]

how do you connect it up to the handbrake?

where is the handbrake wire that i splice intyo or am i missing suumit?

 

[chrisEP82]

i went into the handbrake switch on the hand brake mate

 

[GTnomez]

the handbrake wire by the switch is pretty far from the ecu. they must use suumit else as i dont really want a long piece of wire going by the handbrake

 

[gttuning-glenn]

the handbrake wire by the switch is pretty far from the ecu. they must use suumit else as i dont really want a long piece of wire going by the handbrake

put it under the carpet

 

[Fishy89GT]

lol... they break engines. been there and done it. it took 3days to break

 

[chrisEP82]

when you wired your bee r in did you splice into the ecu wires or cut them out and use the feed from the bee r i have wired up as the diagram on hear but but its not working 100% at the moment i just want to fit and see even if i dont use it any help grateful thanks

 

[WillGT]

my bee r works fine on my car, had no probs with it at all and its been on for about 3 months or somethin like that, you only kill things when you abuse them or set them up wrong i'm afraid.

 

[WillGT]

when you wired your bee r in did you splice into the ecu wires or cut them out and use the feed from the bee r i have wired up as the diagram on hear but but its not working 100% at the moment i just want to fit and see even if i dont use it any help grateful thanks

i spliced mine in bud, just be carefull with the bee r and make sure you dont over do it, once fitted currectly they're are great fun and usefull.