Blitz Dual SBC....

P

Pete EP82

Member +
Does anybody have the wiring diagram for one of these? Or a diagram to show how they are set up? Im struggling to find it....:confused:

Thanks in advance ppl! :)
 
G5EGM

G5EGM

Lifer
iv got the PDF installation instructions for my SBC but not 100% sure wot im doing.....

pretty much do i take the pipe off that joins actuator to turbo n replace it with the 2 in/out hose on the valve box?

Photo0873.jpg


...hose on right being IN n hose on left being OUT (am i correct?)

i.e. turbo - IN hose - thru valve box - OUT hose - actuator :confused:

also the thin black hose (assume vacuum?) gets t-pieced into the hose going to inlet mani from b.o.v.?


please correct me if im wrong..............rep added for help :)
 
pc18

pc18

North West England Area Rep.
the turbo housing goes to the IN port and the actuator goes to the OUT port.

the black plastic pipe goes to a vacuum source on the inlet manifold yes.

Make sure you have it set on actuator if thats what your running instead of an ewg.
 
G5EGM

G5EGM

Lifer
pc18 said:
the turbo housing goes to the IN port and the actuator goes to the OUT port.

the black plastic pipe goes to a vacuum source on the inlet manifold yes.

Make sure you have it set on actuator if thats what your running instead of an ewg.
Click to expand...



Ok thats wot i thought......but wots an ewg?
 
G5EGM

G5EGM

Lifer
MARK@CMBAUTOS said:
call me when u get 5 ;)
Click to expand...



just tried but says ur unavailable?

iv gotta nip out now t meet the bird but should b bak on later, if not tmoro...kinda think i know wot im doin now but still gotta set it up after iv installed it so i mite not b problem free yet :haha:
 
You must log in or register to reply here.
Top