Boost gauge pipe, where to run it?

Tomtheman2

Fresh Recruit
The previous owner has fitted a boost gauge but had the pipe trapped in the door because that is where he located it. Do people drill through the firewall to get the pipe through to miss this problem or take it a different way through?

Any pictures of advice is a great help.

Cheers,
 

terrygtturbo

Member +
The previous owner has fitted a boost gauge but had the pipe trapped in the door because that is where he located it. Do people drill through the firewall to get the pipe through to miss this problem or take it a different way through?

Any pictures of advice is a great help.

Cheers,

There is a few grommits on the bulk head you can feed the pipe threw without any drilling! I think the clutch cable hole is one of them!
 

davehart

Member +
There should be a grommet on the firewall where the speedo cable runs through, you can poke it through there.

Just behind the rear of the engine to the left, have a look there and you will see the grommet to plug it through.
 

Mark-ep91

Member +
mine is put threw a hole where the air con used to be on the passenger side easy to go threw there and you just peel back some carpet in the car and can feed it up threw the glove box and put it anywhere from there!
 
Top