AFR Tuning
Member +
For sale: AEM FIC 8 Piggyback fuel and ignition ecu
Item Condition: New
Price and price conditions: £300 plus postage
Extra Info:
OVERVIEW
The F/IC gives users with OBD-II race vehicles and non-factory forced induction systems the ability to retard ignition and deliver accurate amounts of fuel without the need for outdated FMUs or “boost hiding” controllers. This system works parallel to the factory ECU preventing tuning limitations due to complex factory timing patterns. 21x17 maps with configurable load and RPM breakpoints are easily accessed with the F/IC's Windows-based tuning software. The F/IC draws power from PC USB interface for quick and easy calibration changes.
PRECISE FUEL DELIVERY
The F/IC intercepts the signal to the stock injectors, allowing the user to modify pulse-width by +/-100%. The F/IC is among the only piggy-back systems that can decrease injector pulse-width, allowing the user to drive larger aftermarket injectors* while still maintaining proper air / fuel ratios. This powerful system can also tap into the factory injector signal and work independently to drive up to six (6) additional injectors.
TIMING RETARD CONTROL
The F/IC can retard timing from the factory system based on engine RPM and load inputs. This is achieved by intercepting and delaying the outputs from the cam and crank position sensors to the engine- with no adverse affect on applications equipped with variable cam timing.
SENSOR CALIBRATION & CONTROL
The F/IC can also be used to recalibrate / clamp the MAF sensor, eliminating common problems with non-boosted factory MAFs. The on-board MAP sensor allows for proper fueling in boosted conditions.
CAN-BUS SYSTEMS NOT AFFECTED
Since the F/IC works in conjunction with the factory ECU, late model-vehicles equipped with a CAN-BUS system retain functionality of climate controls, dash and other components on the network.
PRODUCT COMPARISON : F/IC-6 AND F/IC-8
FEATURES F/IC-6 F/IC-8
Injector Channels 6 8
Advanced Injector Load Simulation & Filtering No Yes
Timing Channels (Cam + Crank) 3 5
High/Low Voltage Selectable MAG-Driver Outputs No Yes
TPS Input Yes Yes
MAP Sensor (Onboard) Yes Yes
MAP (0-5v Intercept) Yes Yes
MAF (0-5v Intercept) Yes Yes
Frequency Based Flow Meter Support No Yes*
Speedometer Recalibrator No Yes*
o2 Sensor Remapping Yes Yes
External AFR Input Yes Yes
Generic 0-5v Remappers 2 2
Boost Controller (Requires AEM 30-2400 Solenoid) No Yes
IAT Logging Input No Yes
PC Datalogging Yes Yes
Internal Logging Memory 64 Kb 2 Mb
VTEC Output/Control/+12V Switched Output Yes Yes
Pictures:
Contact Details: Drop me a PM if interested.
Location: Near Crawley, West Sussex
Delivery & Conditions of Delivery: Will be sent on receipt of payment and recorded delivery or other courier. Collection welcome.
Item Condition: New
Price and price conditions: £300 plus postage
Extra Info:
OVERVIEW
The F/IC gives users with OBD-II race vehicles and non-factory forced induction systems the ability to retard ignition and deliver accurate amounts of fuel without the need for outdated FMUs or “boost hiding” controllers. This system works parallel to the factory ECU preventing tuning limitations due to complex factory timing patterns. 21x17 maps with configurable load and RPM breakpoints are easily accessed with the F/IC's Windows-based tuning software. The F/IC draws power from PC USB interface for quick and easy calibration changes.
PRECISE FUEL DELIVERY
The F/IC intercepts the signal to the stock injectors, allowing the user to modify pulse-width by +/-100%. The F/IC is among the only piggy-back systems that can decrease injector pulse-width, allowing the user to drive larger aftermarket injectors* while still maintaining proper air / fuel ratios. This powerful system can also tap into the factory injector signal and work independently to drive up to six (6) additional injectors.
TIMING RETARD CONTROL
The F/IC can retard timing from the factory system based on engine RPM and load inputs. This is achieved by intercepting and delaying the outputs from the cam and crank position sensors to the engine- with no adverse affect on applications equipped with variable cam timing.
SENSOR CALIBRATION & CONTROL
The F/IC can also be used to recalibrate / clamp the MAF sensor, eliminating common problems with non-boosted factory MAFs. The on-board MAP sensor allows for proper fueling in boosted conditions.
CAN-BUS SYSTEMS NOT AFFECTED
Since the F/IC works in conjunction with the factory ECU, late model-vehicles equipped with a CAN-BUS system retain functionality of climate controls, dash and other components on the network.
PRODUCT COMPARISON : F/IC-6 AND F/IC-8
FEATURES F/IC-6 F/IC-8
Injector Channels 6 8
Advanced Injector Load Simulation & Filtering No Yes
Timing Channels (Cam + Crank) 3 5
High/Low Voltage Selectable MAG-Driver Outputs No Yes
TPS Input Yes Yes
MAP Sensor (Onboard) Yes Yes
MAP (0-5v Intercept) Yes Yes
MAF (0-5v Intercept) Yes Yes
Frequency Based Flow Meter Support No Yes*
Speedometer Recalibrator No Yes*
o2 Sensor Remapping Yes Yes
External AFR Input Yes Yes
Generic 0-5v Remappers 2 2
Boost Controller (Requires AEM 30-2400 Solenoid) No Yes
IAT Logging Input No Yes
PC Datalogging Yes Yes
Internal Logging Memory 64 Kb 2 Mb
VTEC Output/Control/+12V Switched Output Yes Yes
Pictures:
Contact Details: Drop me a PM if interested.
Location: Near Crawley, West Sussex
Delivery & Conditions of Delivery: Will be sent on receipt of payment and recorded delivery or other courier. Collection welcome.