Correct Idling for 4EFTE

[Muddy_fox]

Hello! Mates,

What is the correct idling for 4EFTE (Hot & Cold Engine). Mine is 1.2K RPM Cold and 1.1K RPM Hot.

Thanks

 

[GT-TD04]

About 1k-900rpm

 

[Muddy_fox]

If I can't make it below 1K, is there a possibility that it could be a leaking Positive Crankcase Ventilation (PCV)?

Thanks

 

[GT-TD04]

If I can't make it below 1K, is there a possibility that it could be a leaking Positive Crankcase Ventilation (PCV)?

Thanks

Could be,check all vac lines first,including ones off the inlet manifold.

Did you adjust the idle control screw?

And clean Idle control unit and screw

 

[Muddy_fox]

Could be,check all vac lines first,including ones off the inlet manifold.

Did you adjust the idle control screw?

And clean Idle control unit and screw

Idle control screw = are you refering to the screw just above the TPS? If that so, the screw is already tighten-up.

I just adjusted the TPS based on the trouble shooting guide also from this site.

All vacuum lines are fine and with out leak.

regards