Iain@CRD
Lifer
BC Racing Coilovers - EP82/EP91
Description -
The BR series coilovers use a large 44mm diameter piston in a 53mm diameter damper body to maximise oil capacity. As the damper unit operates the oil contained within heats up. The viscosity of oil changes as its temperature varies which can lead to changes in the damping characteristics of the unit.
BC Racing only use a very high quality oil with their coilovers but go that extra mile to maximise performance and build their BR range with a large 53mm diameter damper body. This increases the capacity of the unit which increases the volume of oil contained which in turn reduces the peak temperature and so significantly improves damper performance.
Price - £625.00
TEIN S-TECH Springs
Description -
Price - £210
Please state EP82 (Mark 1 2 or 3) & EP91.
TEIN SuperStreet Coilovers
Description -
Price - £980
Please state EP82 or EP91.
Koni Adjustable Shocks Front + Rear
Description -
KONI serve sporting drivers with a carefully designed range of sport shock absorbers. This line focuses on exceptional road holding combined with an acceptable level of comfort. Its characteristics include responsive steering, reduced body-roll and limited body movements. Externally adjustable shock absorbers make fine tuning even more easy.
NB Rear shockers are complete units, the front however are inserts and you must be mechanically competent to fit them.
Price EP82 - £475
Price EP91 - £450
KAYABA Front Shocks
Description -
Patented valving plus pressurized nitrogen gas account for riding comfort and, at the same time, dramatically reduce the aeration or foaming that commonly occur in shock absorber and cause its performance to start fading, even after only a few minutes in operation.
Price EP82 - £118
Price EP91 - £118
KAYABA Rear Shocks
Description -
Patented valving plus pressurized nitrogen gas account for riding comfort and, at the same time, dramatically reduce the aeration or foaming that commonly occur in shock absorber and cause its performance to start fading, even after only a few minutes in operation.
Price EP82 - £75.00
Price EP91 - £75.00
Description -
The BR series coilovers use a large 44mm diameter piston in a 53mm diameter damper body to maximise oil capacity. As the damper unit operates the oil contained within heats up. The viscosity of oil changes as its temperature varies which can lead to changes in the damping characteristics of the unit.
BC Racing only use a very high quality oil with their coilovers but go that extra mile to maximise performance and build their BR range with a large 53mm diameter damper body. This increases the capacity of the unit which increases the volume of oil contained which in turn reduces the peak temperature and so significantly improves damper performance.
Price - £625.00
TEIN S-TECH Springs
Description -
- Chrome Vanadium SAE9254V Construction
- Progressive Spring Rate Design
- Includes Silencer Rubber on certain applications
- Green Powder Coat Finish
- Developed to be used in conjunction with OEM or OEM replacement dampers
- 1-year Manufacturers Defect and Sag Warranty
- Covers over 5mm sag, breakage, deformity, and noise.
- Does not cover powder coat finish and rusting.
- Contents of Spring Kit:
- Individual Springs × 4
- Main Spring × 4
- Some applications include TEIN Silencer Rubbers
- Warranty Information and Bump Stop Reference Guide
Price - £210
Please state EP82 (Mark 1 2 or 3) & EP91.
TEIN SuperStreet Coilovers
Description -
- Steel Construction
- Twin Tube internal construction
- 16 way adjustable dampers, compression and rebound combined
- Ride Height adjustable via spring seat
- Larger piston diameter for strut type front and rear (22mm)
- Powder coated damper body with Zinc coated threaded section
- 1-year Manufacturers Defect Warranty
- Available for Overhaul
- Contents of Damper Kit:
- Adjustable Shock Absorber x 4
- Bump Rubber x 4
- Main Spring x 4
- Hook Spanner x 2
- Some applications include helper springs
- Dust Cover x 4
- Seat Lock x 12
- Instruction Manual x 1
- Sticker Sheet x 1
Price - £980
Please state EP82 or EP91.
Koni Adjustable Shocks Front + Rear
Description -
KONI serve sporting drivers with a carefully designed range of sport shock absorbers. This line focuses on exceptional road holding combined with an acceptable level of comfort. Its characteristics include responsive steering, reduced body-roll and limited body movements. Externally adjustable shock absorbers make fine tuning even more easy.
NB Rear shockers are complete units, the front however are inserts and you must be mechanically competent to fit them.
Price EP82 - £475
Price EP91 - £450
KAYABA Front Shocks
Description -
Patented valving plus pressurized nitrogen gas account for riding comfort and, at the same time, dramatically reduce the aeration or foaming that commonly occur in shock absorber and cause its performance to start fading, even after only a few minutes in operation.
- Restores OE performance
- One way anti-foaming valve reduces foaming and performance fade
- Three stage dual valving
- Teflon coated piston valve
- Seamless inner cylinder and eye ring, no leaks
- Bonded bushings and sleeves
- Hard chromed piston rod
Price EP82 - £118
Price EP91 - £118
KAYABA Rear Shocks
Description -
Patented valving plus pressurized nitrogen gas account for riding comfort and, at the same time, dramatically reduce the aeration or foaming that commonly occur in shock absorber and cause its performance to start fading, even after only a few minutes in operation.
- Restores OE performance
- One way anti-foaming valve reduces foaming and performance fade
- Three stage dual valving
- Teflon coated piston valve
- Seamless inner cylinder and eye ring, no leaks
- Bonded bushings and sleeves
- Hard chromed piston rod
Price EP82 - £75.00
Price EP91 - £75.00
Last edited: