need to know if the crank has been re-ground or not how can i tell?
S Shak-gt Member + Mar 14, 2010 #1 need to know if the crank has been re-ground or not how can i tell?
Sheldon Malta Area Rep. Mar 14, 2010 #3 check the size with a calliper and compare it with a standard one?
HYBRID Super Moderator <a href="http://www.toyotagtturbo. Mar 14, 2010 #6 if u dont have a micrometer any competent engineer can measure it for you, which is the safest way to know since it may a very minute amount. kon
if u dont have a micrometer any competent engineer can measure it for you, which is the safest way to know since it may a very minute amount. kon
T turboflow Member + Mar 15, 2010 #7 i have a digital micrometer so can measure but has anyone any idea what the standard radius is
350ep70gr Member + Mar 15, 2010 #8 49.985-50.000 mm cover all the 1,2,3 mark.(main journals) Not sure tho..cause the above are for the 5e crank. Woth to compare them with your readings. 42.985-43.000mm (rod journals) Chris Last edited: Mar 15, 2010
49.985-50.000 mm cover all the 1,2,3 mark.(main journals) Not sure tho..cause the above are for the 5e crank. Woth to compare them with your readings. 42.985-43.000mm (rod journals) Chris