down pipe system size ?!

Status
Not open for further replies.

EH@B

Member +
hii guyz
how u doing :)
i just want to ask about the down pipe system with T28 turbo setup
is it ok if been 2inch ?? or should be bigger ??
thnc :)
 

CMR

Member +
2.5 flows completley fine for anything upto and over 300bhp, there is just a few starlets on here who would benefit with anything bigger.
 

Dan3SGTE

Member +
why do you want to replace with 2 inch? That will be way too small for 300HP... Back pressure will be through the roof and you wont make the power. I say 300HP as the T28 is large enough to flow that.
 

_GAZ_EP85_

Member +
if i had a 3" downpipe i would'nt bother changing it, but if you did 2.5" will see 300+ easily enough without problems
 

Rory

Lifer
If you have a 3" down pipe, why the change?

2" will be to restrictive, 2.5" will flow more than enough.
3" is ott unless you are packing serious power.
 

EH@B

Member +
im not running that huge powe ( 300+)
i guess im around 200 hp
and the MOT asked for that becuz its huge for these small cars :( ( their opnions )
if im still around 200 ot 220 .. is there any restrictive
 

Sheldon

Malta Area Rep.
lmao @ the thread how it went...

if you have the old ct9 and cat.. why not put them back for the mot bud? then put the t28 back
 

munday

Member +
im not running that huge powe ( 300+)
i guess im around 200 hp
and the MOT asked for that becuz its huge for these small cars :( ( their opnions )
if im still around 200 ot 220 .. is there any restrictive

Well its not too big, so they are wrong ;)
 
Status
Not open for further replies.
Top