external wastegate

[Quiyetstorm007]

i have an EWG with 2 vaccum pieces and i was wondering where which hose goes to where

 

[Mark-ep91]

i have an EWG with 2 vaccum pieces and i was wondering where which hose goes to where

it depends are you running the boost pressure off of the spring of the wastegate or running a boost controller to up the boost?

 

[Quiyetstorm007]

its a wg with an adjustable spring and a hose to the top and the other at the bottom side
and my plan is to run an electronic boost controller

 

[Mark-ep91]

its a wg with an adjustable spring and a hose to the top and the other at the bottom side
and my plan is to run an electronic boost controller

hers 2 pics i just did on how to set both up

hope it helps ya out

 

[Quiyetstorm007]

thanks man ...big help

but there is another issue.....
i have a garrett turbo which had in an internal wastegate i shut the iwg so that i can run the ewg...however in the diagram which shows the boost source ... i dont have that on my turbo so how do i run that to my boost controller?

kinda new to this thing so

 

[Mark-ep91]

thanks man ...big help

but there is another issue.....
i have a garrett turbo which had in an internal wastegate i shut the iwg so that i can run the ewg...however in the diagram which shows the boost source ... i dont have that on my turbo so how do i run that to my boost controller?

kinda new to this thing so

thats no problem man on your inlet you have a vacum source running to the bov (dump valve) you can t-piece into that and run that pipe to the external wastegate

 

[Quiyetstorm007]

run it to which one...
the bottom one or the top one?

 

[Mark-ep91]

the bottom one in the pictures

basically instead of the boost source coming from the turbo it will be coming from the inlet vacuum source

 

[Quiyetstorm007]

the bottom one in the pictures

basically instead of the boost source coming from the turbo it will be coming from the inlet vacuum source

thanks for the help
really appreciate it