just after some advice about fitting a cusco lower arm bar? :confused:
C carlmcqueen1987 Member + Dec 21, 2010 #1 just after some advice about fitting a cusco lower arm bar?
J25GTi Lifer Dec 21, 2010 #2 Undo one lower arm bolt. Put it through the lower arm back and bolt it back through. Its only 15 minutes work
Undo one lower arm bolt. Put it through the lower arm back and bolt it back through. Its only 15 minutes work
J25GTi Lifer Dec 21, 2010 #3 Bare in mind it doesn't go "inside" the lower arm. Just bolts between the bolt head and the chassis
jezza Lifer Dec 22, 2010 #4 When bolting on the bar, it can sometimes be difficult to find the thread. Jacking up the wishbone itself normally does the trick.
When bolting on the bar, it can sometimes be difficult to find the thread. Jacking up the wishbone itself normally does the trick.
williamocarroll1982 Member + Dec 22, 2010 #5 Sorry to steal the thread but how much of a difference do these actually make. Is it noticeable?