Fitting Dump valve

[TrisK]

Just fitted my dump valve. connected vacum, put breather on rocker cover, so the standard BOV has nothing connected to it, when you unbolt it, there is a 10mm whole.

I looked at these:
http://cgi.ebay.co.uk/BLOW-OFF-VALV...arts_Vehicles_CarParts_SM&hash=item1c12110871

to blank it off, but would that hold up to the pressure? how have you guys done it ?

 

[corofin12345]

Just fitted my dump valve. connected vacum, put breather on rocker cover, so the standard BOV has nothing connected to it, when you unbolt it, there is a 10mm whole.

I looked at these:
http://cgi.ebay.co.uk/BLOW-OFF-VALV...arts_Vehicles_CarParts_SM&hash=item1c12110871

to blank it off, but would that hold up to the pressure? how have you guys done it ?

no point spending money mate.. just cut a piece of aluminuim and drill one side where the bolt went and bolt it on.. theres no pressure here only suction.. make sure you dont drop anything in there tho or like your link go mad a get it for a nice finish

 

[Jayd.m]

or just leav the old one there till you get a frontmount

 

[c3dpo]

Agreed, the dude who sold me my ssqv just gave me a bit of machined metal to bung in the hole. Been fine for years