fitting ep91 front bumper ?

[Glanza-Chris]

glanza had an argument with a focus two weeks ago .. getting a bumper tonight .. just double checking ? is it two 10 mm and 13mm bolts i need and then just slide all the clips into place ?

also bonnet is slightly kinked to one side .. really annoying , how could it be fixed or will i need a new bonnet aswell

thanks guys

 

[George611]

2 x 10mm where it meets the arches
a few 10/12mms along the front underneath (maps don't use 13mm unless they've been replaced over here)
also undo the grille, 4 trim clips.

Depends how bad the bonnet is, you could loosen the 4 10mms on the hinges and try move it slightly but this may effect the way the bonnet close as the latch will be pissed. new bonnet would be the best option matey.

 

[Glanza-Chris]

thanks dude .. got the bumpern the day i posted .. tried moving the bonnet but budged about a cm .. if even .. ifs over oneheadlight and the other headlight sits out from it .. need a bonnet lol .. crash bar has a slight kink in it also ? could this be the problem the bonnet has been pushed towards where the impact was ?