OllieTurbo
Member +
For sale: Forged Engine
Ross Forged Pistons
Pauter Rods
Cruise Valve Springs
NST Crank Pully
ACL Bearings
Fully race balanced
Service cylinder head
Replace all valve guides
Service and replace (as necc) valves,lap and vacuum test.
Surface grind head face 0.005”
Strip,prepare,wash and rebuild with new stem seals and springs
Acl main bearings
Acl b/e bearings
Acl thrust washers
265 billet cams (sound amazing)
Item Condition: Needs work
Price and price conditions: £600
Extra Info: Right, i bought this engine from mcleod a couple of moths back for £1700. The Engine was professionally built and has coverd 20k , everything was fine, then it randomly started knocking. Had the engine taken out and taken apart, and the 3 middle bearing caps are cracked, so will require new bearings etc, and the crank reground. This could be a good cheap buy for someone wanting to go forged on a budget, a well specd engine with uprated cams etc. (will come with standard rocker covers and standard cambelt cover).
Also have a video of it running here just as it started knocking
http://s255.photobucket.com/albums/hh159/olliewintle/?action=view¤t=01082010023.mp4
Pictures:
Heres a pic of engine when in my car:
Contact Details:
Location: Berkshire
Delivery & Conditions of Delivery: Could probbaly deliver but cant see it being too cheap. Or i may deliver it in my van if you pay petrol
Contact : pm or 07796361505
Ross Forged Pistons
Pauter Rods
Cruise Valve Springs
NST Crank Pully
ACL Bearings
Fully race balanced
Service cylinder head
Replace all valve guides
Service and replace (as necc) valves,lap and vacuum test.
Surface grind head face 0.005”
Strip,prepare,wash and rebuild with new stem seals and springs
Acl main bearings
Acl b/e bearings
Acl thrust washers
265 billet cams (sound amazing)
Item Condition: Needs work
Price and price conditions: £600
Extra Info: Right, i bought this engine from mcleod a couple of moths back for £1700. The Engine was professionally built and has coverd 20k , everything was fine, then it randomly started knocking. Had the engine taken out and taken apart, and the 3 middle bearing caps are cracked, so will require new bearings etc, and the crank reground. This could be a good cheap buy for someone wanting to go forged on a budget, a well specd engine with uprated cams etc. (will come with standard rocker covers and standard cambelt cover).
Also have a video of it running here just as it started knocking
http://s255.photobucket.com/albums/hh159/olliewintle/?action=view¤t=01082010023.mp4
Pictures:
Heres a pic of engine when in my car:
Contact Details:
Location: Berkshire
Delivery & Conditions of Delivery: Could probbaly deliver but cant see it being too cheap. Or i may deliver it in my van if you pay petrol
Contact : pm or 07796361505
Last edited: