GlanzaGeek
Member +
Hi all,
Ive been working on my glanza project for a bit now, its on my drive and was running. The other day I was trying to get it on a pair of ramps and it cut out. I thought it ran out of fuel so I went to get some to put in, and just cranked. I thought because its on a slope maybe the pump wasn't getting fuel from the tank, so I put another 5 litres of fuel in but still nothing.
Ive removed the plugs cleaned them and tested, and they are sparking.
The fuel pump is working.
And the rail gets pressured.
But I checked the feeds on the injector, and one side is getting its ignition feed, but when cranking the ECU is sending a live too, shouldn't it be sending an earth?
Ive even tried easy start in the intake and sometimes it will do a little splutter but never ignite.
Racking my brains here, any help is appreciated!
Ive been working on my glanza project for a bit now, its on my drive and was running. The other day I was trying to get it on a pair of ramps and it cut out. I thought it ran out of fuel so I went to get some to put in, and just cranked. I thought because its on a slope maybe the pump wasn't getting fuel from the tank, so I put another 5 litres of fuel in but still nothing.
Ive removed the plugs cleaned them and tested, and they are sparking.
The fuel pump is working.
And the rail gets pressured.
But I checked the feeds on the injector, and one side is getting its ignition feed, but when cranking the ECU is sending a live too, shouldn't it be sending an earth?
Ive even tried easy start in the intake and sometimes it will do a little splutter but never ignite.
Racking my brains here, any help is appreciated!