glanza thermosensor
- Thread starter Sharagath
- Start date
the sensor for the ecu and dash gauge
HYBRID
Super Moderator <a href="http://www.toyotagtturbo.
oke,
i fitted a glanza dash in my paseo. i got a 5E in the front.
i noticed that my gauge is now sitting lower that the oridgional 5E one.
dac69er
Super Moderator
i know that i was talking about the ecu sensor.. the one with the grey clip
fair enough. mine is green and the gauge one is a grey clip single wire jobby!
part no's
the glanza part no's are
84922-35010 (pre may 1997)
84922-16010 (post may 1997 denso)
84922-22030 (post may 1997 saamosta) dunno wha that is!
thats wha the epc threw up for glanza turbo, no idea wha they look like. part no is on the side sensor if you have an old 1
and for the 5e:
84922-20010 (pre 1997)
post 1997, they are same as glanza
hope this helps, as i said, no idea what each 1 looks like or which ecu or loom they mate with.
the glanza part no's are
84922-35010 (pre may 1997)
84922-16010 (post may 1997 denso)
84922-22030 (post may 1997 saamosta) dunno wha that is!
thats wha the epc threw up for glanza turbo, no idea wha they look like. part no is on the side sensor if you have an old 1
and for the 5e:
84922-20010 (pre 1997)
post 1997, they are same as glanza
hope this helps, as i said, no idea what each 1 looks like or which ecu or loom they mate with.
thanxs
my epc shows a very different engine when i select a glanza or other 4efte suited cars.
i get a RWD car with the old body, i think the KP6 orso