glanza

Aus_Ep82

Fresh Recruit
theres a tutorial on how to derestrict the boost its a piece of piss!

you literally take 1 hose off the solenoid and 1 end of the pipe back onto the hole you moved the other pipe off. literally a 1 minute job.

hopefully threw searching the site youll find a decent picture

And BANG goes your engine!!

Anything thats that simple isnt going to work, maybe look at a spare engine because your going to blow the one you have if your not careful.

Look into proven mods that are done time and time again- exhaust, air filter and an actuator. These mods should see you have about 120hp at the wheels which is decent for the money spent in my opinion.
 

pete_r86

Member +
And BANG goes your engine!!

Anything thats that simple isnt going to work, maybe look at a spare engine because your going to blow the one you have if your not careful.

Look into proven mods that are done time and time again- exhaust, air filter and an actuator. These mods should see you have about 120hp at the wheels which is decent for the money spent in my opinion.

i've done it on my car and have had it like that for over a year. no new engine for me:p
 

GT-TD04

Supermoderator
And BANG goes your engine!!

Anything thats that simple isnt going to work, maybe look at a spare engine because your going to blow the one you have if your not careful.

Look into proven mods that are done time and time again- exhaust, air filter and an actuator. These mods should see you have about 120hp at the wheels which is decent for the money spent in my opinion.


i had filter,exhaust and leads aswell as boosting 12psi and i only made 110.5 atw..
 

Dan3SGTE

Member +
And BANG goes your engine!!

Anything thats that simple isnt going to work, maybe look at a spare engine because your going to blow the one you have if your not careful.

Look into proven mods that are done time and time again- exhaust, air filter and an actuator. These mods should see you have about 120hp at the wheels which is decent for the money spent in my opinion.

no disrespect mate but your talkin cackers.... this mod has been proven time and time again by plenty of members on here... your de-restricting it, thats all..... allowing the most to rise to its i'd say "standard" form/pottential.....
 

GT-TD04

Supermoderator
no disrespect mate but your talkin cackers.... this mod has been proven time and time again by plenty of members on here... your de-restricting it, thats all..... allowing the most to rise to its i'd say "standard" form/pottential.....


I agree but if it is creeping in boost already then it can shit a brick so to speak.
 

Adam_Glanza

Member +
well lets listen to the stupid aus noob.. or...

do it as about every single starlet member has done it and never had a problem so its down to you mate, ive personally done it on my car too and never once had a problem. doesnt overboost or anything bla bla, only since i put my decat on have i had boostcreep problems
 

Dan3SGTE

Member +
I agree but if it is creeping in boost already then it can shit a brick so to speak.

whos on about creeping...? why would it creep anyhow by bypassing the solenoid to run "standard boost" ? And if this was the case you would be aware of the creeping unless your a spastic then you take further action to solve the problem......
 

GT-TD04

Supermoderator
well lets listen to the stupid aus noob.. or...

do it as about every single starlet member has done it and never had a problem so its down to you mate, ive personally done it on my car too and never once had a problem. doesnt overboost or anything bla bla, only since i put my decat on have i had boostcreep problems


eh, whos that aimed at?
 

GT-TD04

Supermoderator
whos on about creeping...? why would it creep anyhow by bypassing the solenoid to run "standard boost" ? And if this was the case you would be aware of the creeping unless your a spastic then you take further action to solve the problem......

Yes but we are talking to someone who isn't fully clued in.
Read my post right, i said if it was creaping above stock already (via filter etc) then de-restricting it would cause it to do harm to the engine in some cases
 

Dan3SGTE

Member +
Yes but we are talking to someone who isn't fully clued in.
Read my post right, i said if it was creaping above stock already (via filter etc) then de-restricting it would cause it to do harm to the engine in some cases

but he never mentioned that it was creeping already...? if he did then i see what your saying, but he didnt so kinda irrelevant no....?
 
Top