Group Buy Special Offer - ISC Coilover Kit's
- Thread starter Nick@TD.co.uk
- Start date
- Status
Nick@TD.co.uk
Registered Trader <a href="http://www.TuningD
Yeah all sent out mate with the catch tankAwesome news!! Cant wait to get these mofos! Remember to sent my catch can too please
Haha steady now man! should be with you monday i would think mate
Many Thanks
~Nick @ Tuning Developments
Fro
Member +
Yeah all sent out mate with the catch tank
Haha steady now man! should be with you monday i would think mate
Many Thanks
~Nick @ Tuning Developments
Who`s the man!! Will let you know when they arrive!
lleey2k4
Member +
Nick@TD.co.uk
Registered Trader <a href="http://www.TuningD
Thanks for that mate glad your happy, would like to see pictures of them fitted from everyone and feedback would be much appreciated if possible?Got mine today
They look the bollox.
I fitted the rears with no problems at all. Straight on. Am going to fit the front ones tomorrow and will let you know how they are, then I need to get them set up properly.
It was well worth the wait.
Thanks alot
haha dance away mate glad your happy and sorry for the delay, as said above would appreciate feedback greatly!
Glad to hear dude and you work fast mate thats for sure!Got mine this morning and fitted in my half hour dinner
Just a few minor problems like i cant get the camber bang on need my tracking sorted toe in is mental haha skipping everywhere on my way home haha.
Just a note to everyone please do get your wheel alignment setup so you don't scrub tyres badly from a unsetup car.And thanks again for your support, if anyone needs anything else just let us know via PM or Email!
Many Thanks
~Nick @ Tuning Developments
lleey2k4
Member +
Thanks for that mate glad your happy, would like to see pictures of them fitted from everyone and feedback would be much appreciated if possible?
haha dance away mate glad your happy and sorry for the delay, as said above would appreciate feedback greatly!
Glad to hear dude and you work fast mate thats for sure!
And thanks again for your support, if anyone needs anything else just let us know via PM or Email!
Many Thanks
~Nick @ Tuning Developments
Oh yer i forgot the main thing.
What is the crack with the brake hose brackets? I wasnt sure where they go so i left them off but will attempt to fit them tomoz im thinking i may have to bend them around the base of the coilover.
Nick@TD.co.uk
Registered Trader <a href="http://www.TuningD
Yeah there universal brake line brackets for the front lines mate, just bend them to however suits mate and secure the front brake lines in them.
Many Thanks
~Nick @ Tuning Developments
ninja1270
Member +
Fitted the fronts today, had to wait till after work
i cable tied the hoses n that for the time being and i had same problem with the camber. All over the place lol
The only thing I'm a bit worried about was the 2 bottom bolts. Am going to get some longer ones just to be sure
Part from that went on lovely. didn't take long and they look the bollox.
Just waiting for my panhard rod now n then setting them all up
Thanks again
i cable tied the hoses n that for the time being and i had same problem with the camber. All over the place lol
The only thing I'm a bit worried about was the 2 bottom bolts. Am going to get some longer ones just to be sure
Part from that went on lovely. didn't take long and they look the bollox.
Just waiting for my panhard rod now n then setting them all up
Thanks again
ninja1270
Member +
Just put one round the strut so its in the same sort of position it was with the standard one
ninja1270
Member +
seems ok for the minute tbh
need to bend these things we got or going to make something up.
car feels so shit on the road lol
toe in is so bad. cant wait to set them all up =]
i cable tied the top bracket to the strut where it should be and then the hose to that so its not hitting the strut
think that's how I done it lol
need to bend these things we got or going to make something up.
car feels so shit on the road lol
toe in is so bad. cant wait to set them all up =]
i cable tied the top bracket to the strut where it should be and then the hose to that so its not hitting the strut
think that's how I done it lol
Last edited:
lleey2k4
Member +
HAHA i did it 1st and had loads of positive camber and the toe out was mental, so when finished all my work got it back on the 2 poster and managed to sort it out with a little negative camber. Drove home with the toe in and the steering was soo twitchy and tyres were screaming when turning round corners at slow speeds lol, but i will get it all sorted tomorrow and test the handling out
ninja1270
Member +
HAHA i did it 1st and had loads of positive camber and the toe out was mental, so when finished all my work got it back on the 2 poster and managed to sort it out with a little negative camber. Drove home with the toe in and the steering was soo twitchy and tyres were screaming when turning round corners at slow speeds lol, but i will get it all sorted tomorrow and test the handling out
haha
exactly the same mate!
was like shit!!!!
i just took wheel off n adjusted the bolt on the bottom.
used the width of a cable tie to measure the distance from the bolt to the egde of mount if u c what i mean so i could get both sides as close as i could.
a bodge for now but it got me home and i will be sorting it all out and setting it up this weekend on my mates 4 wheel alignment . cant wait to lower it
- Status