help needed to fit a ebc

B

billy_wizz

Member +
hello i have a gizzmo ebc and not a clue where the pipes go as i am still running the std acctuator and it has 2 outlets on it
if any one could help me it would be really great full please and if you had pics that would be great but any help would be awsome :)
 
williamocarroll1982

williamocarroll1982

Member +
Block the one pointing up and connect the boost controller to the one pointing in towards the engine

13052010101.jpg
[/IMG]
 
williamocarroll1982

williamocarroll1982

Member +
This is how my blitz k1 came on my car from japan and as you can see the pipe that's coming off turbo compressor housing has been block on my k1. I have never fitted a gizmo ebc before but from what I know about the ones I have fitted you need a boost pressure source going to the ebc and the outlet from the ebc goes to the actuator. You can get your boost pressure source from the inlet manifold or from the pipe on the compressor housing on the turbo
 
B

billy_wizz

Member +
williamocarroll1982 said:
This is how my blitz k1 came on my car from japan and as you can see the pipe that's coming off turbo compressor housing has been block on my k1. I have never fitted a gizmo ebc before but from what I know about the ones I have fitted you need a boost pressure source going to the ebc and the outlet from the ebc goes to the actuator. You can get your boost pressure source from the inlet manifold or from the pipe on the compressor housing on the turbo
Click to expand...

Cool thank you x
 
You must log in or register to reply here.
Top