help on avcr

[woof]

how to check the solenoid of avcr if it is working? i set the boost in .28% and the duty 20%. if i will test i got over boost. the avcr don't lock at boost .28%

 

[madman]

it wont boost .28 because the actuator or waste gate is pre set to a minimum boos IE .8 and you wont get it to boost less than that

ill look for the avc-r manual for ya

EDIT: Clicky

 

[woof]

the solenoid valve have COM and ON. the one in from wastgate that is connect to COM. the second is ON where i connect?

 

[woof]

help to connect the hose of solenoid valve of avcr? where to go COM and ON?

 

[madman]

are you using actuator a or a wastegate?

 

[woof]

external wastegate sir. im using tdo4 turbo

 

[madman]

you don't do anything with the other NO port just leave it as it is

 

[woof]

tnx sir.
i follow the pic.
i have one question i set the avcr boost @ .60 and duty is 35%. the avcr lock @ 5psi the monitor avcr is .37 boost. the right is .60 boost @ 9 psi. what the problem now? do you think the solenoid valve is working?