help turbo timer

[yan]

hi, got an ultra turbo timer to fit. it contains 7 wires, one set of four wires and three respectively. The set of four wires are red, blue, black and green. And the set of three wires are yellow, green and gray.
And help is appreciated, thnx

 

[yan]

!!!

Anyone

 

[yan]

ep 91

!!!!

 

[monka]

should have come with a wiring diagram, although you may be able to find one on the net?

 

[yan]

!

I ve try on the net but in vain, I got it from a fren and no manual guide

 

[Ramirez]

my dear friend..i have the same turbo timer...there are three cables...that are thicker and the other ones are thiner...so the red is permanent +12V
the Black - Ground...the blue should go on the ACC and the green on the ON..the other ones are speed sensor and handbrake..i have an other problem..when i connect the wires when i turn the key from On position to ACC the engine runs as it should be..but when i try to take the key to position Lock so that i could take it out..the starter run...so i can't take out the key

 

[yan]

!

Why do u think its like that, What abt the colour of the wiring that goes on the handbrake and speed sensor... Thnx