Help with cam gear please

[nutta]

well im wanting to remove the head, so far iv taken off the bottom pully, cam belt, tensioner and idler, but cant get the cam gear off, if i try it any harder it will just round off the bolt.

Any ideas??

Cheers

 

[MARK@CMBAUTOS]

try these in the morning :haha:

sorry i couldnt resist :haha:

 

[nutta]

hahaha

iv tried to do it but cant get the cams to stay still

 

[corofin12345]

try these in the morning :haha:

sorry i couldnt resist :haha:

haha..@nutta extend your lever or use a torque wrench

 

[nutta]

i have done but now the bolt is starting to round off

 

[MARK@CMBAUTOS]

i have done but now the bolt is starting to round off

there should be a slot/bit on the cams for holding them with a spanner/shifter then crack ur cam one
i usually slaking it before removing the timing belt as that holds it for ya

 

[nutta]

ok cheers, hopefully il get it off.

 

[corofin12345]

as what mark said but if all else fails heat it up

 

[Mikey4410]

I always find giving tuff bolts/nuts a good few hits with a hammer always works!!!!

 

[AzE_B]

make sure your using a 6 sided scoket, impacted would be best as its a better fit