hesitation

Starletfreak

Member +
Guys

Ive got a new problem with my car,i dont know if it is becus of the sliping disk that is causing that.

Anyways when i aplly throtle my car seems to hesitate before going,and when you give it some stick it as if you driveng an automatic car

Is it cause of the sliping clutch...
 

adi271087

Fresh Recruit
sorry to hyjack but wen replacing standard cluch is it just the disk ya buy. or the pressure plate aswel
 

finx

Member +
whole clutch kit. pressure plate, clutch plate and new release bearing.
very important is make sure you get the flywheel machined. and its good practice to also replace the engine rear manin seal while you have the gearbox flywheel off.
 

Starletfreak

Member +
clutch

i was using a standard clutch..but did not last long...need to get paddle clutch ow..can i get a paddle clutch from speedvision and use my existing pressure plate and release bearing?
 

Texx

Super Moderator
If the standard pressure plate you are using cannot cope with the amount of torque the engine puts out, then your only option is to uprate the whole lot. A paddle type clutch disc wont make much of a difference if your going to use the same pressure plate that has insufficient clamping force.
 
Top