Hks pfc f-con

[Sound Per4mance VI]

How good are these? compared to other options available

thanx

 

[Phil]

user friendly, think of it as the oldskool piggyback.

9presets and a safc style GCC to fine tune.

doesnt like increased fuel pressure and needs to be set up using a wideband ofcourse.

good flexiblity for what it costs in my opinion.

Phil

 

[Sound Per4mance VI]

user friendly, think of it as the oldskool piggyback.

9presets and a safc style GCC to fine tune.

doesnt like increased fuel pressure and needs to be set up using a wideband ofcourse.

good flexiblity for what it costs in my opinion.

Phil

how much do they usually go for? how do you tune or set it?

 

[Phil]

the main unit is worth around 180/200gbp.
for a complete kit with harnesses for:
FCON unit
GCC graphic controller
FCD fuel cut defender
SLD speed limiter defender
IPM injector pulse moniter

you are looking at 350gbp

for a the FCON and FCD (minimum you would need for a mildly tuned ct9 setup) would be somewhere between those two ballpark figures.

you tune using a wideband to check the AFR whilst adjusting the presets on the fcon unit using a screwdriver, and then fine tune using the GCC is you have one, agin using a small screwdriver.

Phil

 

[Sound Per4mance VI]

the main unit is worth around 180/200gbp.
for a complete kit with harnesses for:
FCON unit
GCC graphic controller
FCD fuel cut defender
SLD speed limiter defender
IPM injector pulse moniter

you are looking at 350gbp

for a the FCON and FCD (minimum you would need for a mildly tuned ct9 setup) would be somewhere between those two ballpark figures.

you tune using a wideband to check the AFR whilst adjusting the presets on the fcon unit using a screwdriver, and then fine tune using the GCC is you have one, agin using a small screwdriver.

Phil

where can i get the graphic control

 

[Phil]

ebay or Yahoo jap auctions. try mark&JGT @glanza.co.uk they could probably source you one fairly easy.

Phil

 

[Sound Per4mance VI]

ebay or Yahoo jap auctions. try mark&JGT @glanza.co.uk they could probably source you one fairly easy.

Phil

is the gcc universal and fits all fcons?

 

[Phil]

yes id say so. its the fcon unit that needs to be starlet specific.

Phil

 

[Sound Per4mance VI]

yes id say so. its the fcon unit that needs to be starlet specific.

Phil

rep added

I just bought a FCON, SLD, FCD, MAP SENSOR, HARNESS and dont have the GCC, would that mean the main unit it has a preset setting until i get the GCC?

 

[Phil]

yes inside the fcon youll see a dial with 0-9 on it.

cheers, im off home now.

Phil

 

[Sound Per4mance VI]

yes inside the fcon youll see a dial with 0-9 on it.

cheers, im off home now.

Phil

so I would have to open it up to set it until i get a GCC