Horn problem HELP

[VPower]

Hey guys

I have recently fitted a momo steering wheel and boss but the ring on the back of the boss to link the horn up doesn't connect to anything. Was just wondering what other people have done to make the horn work on aftermarket steering wheels.

I have to have a horn as there are so many shitty drivers on the road lol.

Any help would be appreciated.
cheers

 

[VPower]

bump

 

[gv1.3]

Horn Problem

Give these a blast.

 

[Glanza Gaz]

Give these a blast.

lol you fucker you beat me to it

 

[Arnold]

Connect it under the nut which holds the steering wheel on. That should earth it and make it work. The other connector connects to the original horn wiring

 

[VPower]

Connect it under the nut which holds the steering wheel on. That should earth it and make it work. The other connector connects to the original horn wiring

no that wont work.

Come on guys, loads of you have momo steering wheels, how have you made the horn work?

 

[Arnold]

no that wont work.

Come on guys, loads of you have momo steering wheels, how have you made the horn work?

That's how the momo was connected in my car..........................

 

[Matt-ep82]

What i done was cut the brass ring on the back of the original steering wheel and and glued it on to the boss so it made contact with the brass ring around the steering wheel shaft.Then connect the wire thats coming from the brass ring on the back of the original steering to the horn and earth the wire from the horn.Thats wat i done but there is probley an easyer way but thats the way i done it and it worked for me so let us know if works.