Ignition Lead order

[joshhayat]

Hello could anyone tell me the igntion lead firing order from the distributor cap,pics would be helpful thanks

 

[dac69er]

left to right. 1,2,3,4.

number 4 is dizi cap end

 

[joshhayat]

Thanks that's how I put them back in, I changed the cylinder head put everything back engine tickin over ok but engine won't start got any ideas

 

[dac69er]

distributor fitted the right way? cams lined up correctly? cambelt set correctly. are you actually get a spark and fuel?

 

[joshhayat]

Checked all spark plugs and they are sparking,checked all alignement,checked fuel but still not starting

 

[AdamB]

Check over the sensor's you have disconnected or may have disrupted.

 

[weeJohn]

The dizzy cap usually has the cylinder lead numbers printed on it. Remove a spark plug and check if its dry or wet, if its wet either try another set or leave them somewhere warm or use a heat gun on them to dry them out.

 

[scot-ish]

Thanks that's how I put them back in, I changed the cylinder head put everything back engine tickin over ok but engine won't start got any ideas

how can it be ticking over nicely if it wont start?