injector lag times?

[dac69er]

anyone know of a site to find these? i have some 3sge 370cc injectors and want to know the lag time compared to the stock injectors.

thanks

 

[Rev]

I found this info previously, maybe what your are looking for -
23209-74220 Toyota (AS 23250-74220)______________Pintle holes Resistance (ohms)_Duration Time (14v) _Base fuel kg/cmsqd_CC/min

340cc____ SXE10____3S-GE______ Aizo White__Ellipse_____6__________14__________ 0.76ms__________2.55________340
__________________________________________________________________________0.76ms__________3.05________370
__________________________________________________________________________0.78ms__________3.55________400

I cannot find the link for this but it came from an excel spread sheet labelled injector specs JDM.

 

[Skalabala]

You need to play with them I suppose.
Lag time is only relevant when the pressure is correct anyway.

 

[dac69er]

You need to play with them I suppose.
Lag time is only relevant when the pressure is correct anyway.

true. but if the fuel pressure is the same for both injectors used then its all relative surely? i only need to add extra lag time if its more than the standard injectors.


does anyone know the lag time of standard injectors?

 

[Rev]

Stock injectors are 0.9ms @2.55 kg/cm sqd flow 290 cc ; 0.91ms @3.05 kg/cm sqd flow 330cc and 0.93ms @ 3.55 kg/cm sqd flow 345cc

Ok have found one of my references > Try this link http://www.williams.co.tt/s15/inj_top-en.htm