injectors

[danielpates]

would these fit on a starlet glanza

http://cgi.ebay.co.uk/Denso-550cc-T...ryZ10400QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

there from an rx7

 

[Toby@ToyTuning.com]

Unfortunately not they have the wrong spray pattern.. Be careful with s/hand injectors and make sure they have been flow tested, you may save some bucks now but they are such an important part of any setup and if they fail you will be pay dearly in the long run. Not that all s/hand injectors are useless just be wary

T

 

[Dave@TM-developments.com]

Agreed Toby, I have said this all along about RX7 injectors

 

[danielpates]

what injectors can be used in a 4efte

 

[steveep82]

funny that, im running the same injectors with no problems.

 

[Toby@ToyTuning.com]

You will be able to get them to work, at the end of the day fuel comes out which is what the engine needs but you want a perfect spray pattern into the combustion chamber not a dribble..

T

 

[jezza323]

as Toby has said, rx7 injectors do not have a good spray pattern

you will get much better tune and economy from a set of injectors with a correct spray pattern

 

[joshuaboy]

what injectors can be used in a 4efte

Honda Civic or Integra B16/B18 Injectors.

 

[mayzie]

what cc are the honda b16 b18 injectors then.

 

[joshuaboy]

what cc are the honda b16 b18 injectors then.

I thought you were ordering from ebay. Just type in the size you're looking for along with Integra GSR. They fit right up and are the right resistance. Make sure you order the plugs with them.

 

[dave123456789]

Im using Mazda Familia GTX injectors, picked them up for $20

 

[Brad]

what modifications do you have to warrant changing the injectors ?

 

[joshuaboy]

what modifications do you have to warrant changing the injectors ?

Just the Plugs, which you can order with the Injectors. Just splice them into the harness. Use back the Starlet Seals (preferably new ones).