Interest in braided fuel lines?

N

Nick@TD.co.uk

Registered Trader <a href="http://www.TuningD
Afternoon folks,

Just wondering what interest if any there would be for braided fuel lines to suit the stock fuel rail?

We would supply a 2 line kit, one running from the fuel filter to the fuel rail, and the other from the fuel rail to the return hardline.

Would be something along the lines of this:

PICT3116.jpg


Pricewise, looking around £50.00 or so delivered for the pair if we run a group buy to launch them :)

If people would be interested then please pop your name down below!

Cheers

Mike Jones
Tuning Developments Ltd
 
Blak_Mamber

Blak_Mamber

Member +
I would be interested mate. How easy is it to get the existing line removed from the fuel rail? Ill have to post a pic of what ive got at the moment to make sure it can fit.
 
N

Nick@TD.co.uk

Registered Trader <a href="http://www.TuningD
00Joeindastarbo said:
I'd be interested if they are to suit an aftermarket fpr
Click to expand...
Hi buddy,

This can be sorted without issue, would just need to know which FPR and what type the fittings are.

Would need to be mounted in a similar area to the standard one though otherwise the line will be quite long and thus more expensive :)

Cheers

Mike Jones
Tuning Developments Ltd
 
9

96v

Member +
i could well be up for this! depending on wether or not you really need to run an fpr with the emu??
if there is absolutely no need i.e the fuel pressure wont drop when running the emu i am definitely in :D
 
N

Nick@TD.co.uk

Registered Trader <a href="http://www.TuningD
Running an FPR is dependant on injector size and what boost/power you wish to run.

We could sort a kit to suit an FPR just as above it would need to be mounted on the drivers side near the stock regulator to keep the price down :)

Cheers

Mike Jones
Tuning Developments Ltd
 
carmen

carmen

Member +
I have just bought a FSE RRFPR but it will not be fitted for a another week or so if you could make pipe work to suit it ill have it mounted close to where the old one sat
 
M

MickeyB

Fresh Recruit
Hi, I have one of your billet fuel rails and an FSE RRFPR, could you supply braided hoses for this setup?
If so I'd be interested.
 
N

Nick@TD.co.uk

Registered Trader <a href="http://www.TuningD
Hi guys,

We've been thinking about how to go about suiting everyones setup, and its tricky!

We're going to end making lines to suit an OEM rail & FPR, then also an OEM Rail with our Adjustable FPR, may even offer them as a package :)

Would you guys prefer the aeroquip type adaptors or would braided hose with swage fittings be ok?

Cheers

Mike Jones
Tuning Developments Ltd
 
George611

George611

Member +
Definatly areoquip adaptors and oem fuel rail sounds best as thats what most people run (Y) id probably have one of these kits with a FPR depending on price ;)
 
You must log in or register to reply here.
Top