Nick@TD.co.uk
Registered Trader <a href="http://www.TuningD
We have just been appointed a dealer for all JPerformance products so we can now offer a huge range of products for the Toyota Starlet GT Turbo EP82 and Toyota Glanza EP91.
EP82/EP91 4E-FTE Front Mount Intercooler Kits
Brand new Front Mount Intercooler for the Toyota Starlet GT Turbo , all years all models*. The intercooler core size is a massive 600 x 260 x 70MM and has a pressure drop of only 0.2psi @ 15 psi. The intercooler is polished aluminium with a Bar and Plate design.
The pipe work is polished aluminium. ABS and air conditioning do no not need relocated or removed. The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz and HKS, in most cases this front mount intercooler is larger and more efficient. ~9.2KG in total weight! .
* Fully polished side tanks
* Tabs on bottom and top for easy installation
* Improved Bar and Plate to increase performance efficiency
* Core size 600mmx260mmx70mm
* End to end 780mm
* Inlet 75mm (3 inch) O/D
* Outlet 75mm (3 inch) O/D
* Supports more than 650HP
* Latest unique Bar and Plate core design to improve air velocity by 16% over the old design
* Fully polished alloy intercooler
* Ultra low pressure drop 0.5-1psi at 23psi (Normal Bar and Plate 2.8- 4 psi at 23 psi)
* 35 % weight reduction
* The kit will not only dress up your engine bay but will also allow for the much better flow of air in and out of your intercooler maximizing cooling on your Starlet GT Turbo
JPerformance Retail Price - £320
Tuning Developments Price - £264.99 Delivered
Click Here For Further Details and To Order Online
EP91 4E-FTE Front Mount Intercooler Kits
complementing the line of high-performance upgrades and intercooler kits, we can now supply an Intercooler Kit were its designed to provide maximum cooling efficiency to prevent premature engine failure.
These Intercooler Cores are full light-weight, high-heat transferring aluminum featuring a Bar and plate design that dramatically increases surface area that enables the heat to dissipate more efficiently,
This is a hand made, custom built performance Intercooler made from aircraft grade 5052 aluminum.
Specs:
* Bar and plate design intercooler 587mm x 212mm x 100mm
* Full set of Polished Aluminum !! Intercooler Pipes
* Direct fitment- retains factory fog lights and battery positions
* Maximum Cooling Capacity Allowing for Minimal Pressure Drop
* All Clamps And Triple-Layer Silicone (blue) Connectors Supplied
* Capable Of 550BHP
JPerformance Retail Price - £299.99
Tuning Developments Price - £269.99 Delivered
Click Here For Further Details and To Order Online
EP82/EP91 Stainless Steel Braced Downpipe/Decats
JPerformance Decat / Test Pipes offer the ultimate in high-flow performance. Offering substantial horsepower gains in the higher-end of the power band. The JPerformance Test-Pipes are made of Stainless Steel with a quality polished finish and a straight through design, but serve to give your custom exhaust system a more mellow-deep tone
Spec:
* Manufactured from mandrel bent SUS316(not 304) grade stainless steel
* Fantastic High Quality Stainless Steel Exhaust
* 2.5'' full mandrel bent
* Braced for optimum Support
* Full Mirror Polished System
* Gaskets & Bolts included
* 100% Brand new in original box
Tuning Developments Retail Price - £149.99 Delivered
Click Here For Further Details and To Order Online
EP91 Cat Back Full Exhaust System
This Cat-Back System, is made with SUS 304 Stainless Steel with fully polished surface, CNC machined flanges and are mandrel bent. Its aggressive styling and deep, strong tone are just part of this Cat-Back system. It is also able to improve horse power and performance with its straight-through design. Our catbacks are branded for quality and come with a limited lifetime warranty*
Spec:
* Manufactured from mandrel bent T304 grade stainless steel
* This CAT back mirror polished system ,With a 2.25" Frontpipe, 3" Mid Section With 4 1/2" Tailpipe
* This Exhaust system will improve throttle response, and increase power by up to 15BHP
* Fantastic High Quality Stainless Steel Exhaust
* Mirror Polished All The Way Through
* Gaskets & Bolts included
* 100% Brand new in original box
Tuning Developments Retail Price - £269.99 Delivered
Click Here For Further Details and To Order Online
-------------------------------- How To Order --------------------------------
All products will be added to our website once it launchs back online but at present we can take orders via Private Message or via Email at Enquiry@TuningDevelopments.co.uk
Payment Methods : Paypal, Bank Transfer, Cheque or Cash
Delivery : All Prices Listed Inc Delivery to Mainland UK, If outside the Mainland UK please enquire for a delivery quote, Collection is very welcome from our premises.
Enquiry@TuningDevelopments.co.uk
Many Thanks
Tuning Developments LTD
EP82/EP91 4E-FTE Front Mount Intercooler Kits
Brand new Front Mount Intercooler for the Toyota Starlet GT Turbo , all years all models*. The intercooler core size is a massive 600 x 260 x 70MM and has a pressure drop of only 0.2psi @ 15 psi. The intercooler is polished aluminium with a Bar and Plate design.
The pipe work is polished aluminium. ABS and air conditioning do no not need relocated or removed. The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz and HKS, in most cases this front mount intercooler is larger and more efficient. ~9.2KG in total weight! .
* Fully polished side tanks
* Tabs on bottom and top for easy installation
* Improved Bar and Plate to increase performance efficiency
* Core size 600mmx260mmx70mm
* End to end 780mm
* Inlet 75mm (3 inch) O/D
* Outlet 75mm (3 inch) O/D
* Supports more than 650HP
* Latest unique Bar and Plate core design to improve air velocity by 16% over the old design
* Fully polished alloy intercooler
* Ultra low pressure drop 0.5-1psi at 23psi (Normal Bar and Plate 2.8- 4 psi at 23 psi)
* 35 % weight reduction
* The kit will not only dress up your engine bay but will also allow for the much better flow of air in and out of your intercooler maximizing cooling on your Starlet GT Turbo
JPerformance Retail Price - £320
Tuning Developments Price - £264.99 Delivered
Click Here For Further Details and To Order Online
EP91 4E-FTE Front Mount Intercooler Kits
complementing the line of high-performance upgrades and intercooler kits, we can now supply an Intercooler Kit were its designed to provide maximum cooling efficiency to prevent premature engine failure.
These Intercooler Cores are full light-weight, high-heat transferring aluminum featuring a Bar and plate design that dramatically increases surface area that enables the heat to dissipate more efficiently,
This is a hand made, custom built performance Intercooler made from aircraft grade 5052 aluminum.
Specs:
* Bar and plate design intercooler 587mm x 212mm x 100mm
* Full set of Polished Aluminum !! Intercooler Pipes
* Direct fitment- retains factory fog lights and battery positions
* Maximum Cooling Capacity Allowing for Minimal Pressure Drop
* All Clamps And Triple-Layer Silicone (blue) Connectors Supplied
* Capable Of 550BHP
JPerformance Retail Price - £299.99
Tuning Developments Price - £269.99 Delivered
Click Here For Further Details and To Order Online
EP82/EP91 Stainless Steel Braced Downpipe/Decats
JPerformance Decat / Test Pipes offer the ultimate in high-flow performance. Offering substantial horsepower gains in the higher-end of the power band. The JPerformance Test-Pipes are made of Stainless Steel with a quality polished finish and a straight through design, but serve to give your custom exhaust system a more mellow-deep tone
Spec:
* Manufactured from mandrel bent SUS316(not 304) grade stainless steel
* Fantastic High Quality Stainless Steel Exhaust
* 2.5'' full mandrel bent
* Braced for optimum Support
* Full Mirror Polished System
* Gaskets & Bolts included
* 100% Brand new in original box
Tuning Developments Retail Price - £149.99 Delivered
Click Here For Further Details and To Order Online
EP91 Cat Back Full Exhaust System
This Cat-Back System, is made with SUS 304 Stainless Steel with fully polished surface, CNC machined flanges and are mandrel bent. Its aggressive styling and deep, strong tone are just part of this Cat-Back system. It is also able to improve horse power and performance with its straight-through design. Our catbacks are branded for quality and come with a limited lifetime warranty*
Spec:
* Manufactured from mandrel bent T304 grade stainless steel
* This CAT back mirror polished system ,With a 2.25" Frontpipe, 3" Mid Section With 4 1/2" Tailpipe
* This Exhaust system will improve throttle response, and increase power by up to 15BHP
* Fantastic High Quality Stainless Steel Exhaust
* Mirror Polished All The Way Through
* Gaskets & Bolts included
* 100% Brand new in original box
Tuning Developments Retail Price - £269.99 Delivered
Click Here For Further Details and To Order Online
-------------------------------- How To Order --------------------------------
All products will be added to our website once it launchs back online but at present we can take orders via Private Message or via Email at Enquiry@TuningDevelopments.co.uk
Payment Methods : Paypal, Bank Transfer, Cheque or Cash
Delivery : All Prices Listed Inc Delivery to Mainland UK, If outside the Mainland UK please enquire for a delivery quote, Collection is very welcome from our premises.
Enquiry@TuningDevelopments.co.uk
Many Thanks
Tuning Developments LTD
Last edited:
