just fitted my hks actuator and very noticible

Q

Quick Nick

Member +
This is all very interesting. I recently fitted my HKS actuator (.9 BAR), WEPR mani and Screamer De-cat, RRFPR (set at 2.8 BAR) and FCD and I have noticed a good power gain. I also ported my wastegate as have read many reports of overboost with these mods.

Boost does drop off at top end, I think may have ported wastegate a tad too much, but should be right amount if running 1 BAR Boost which is planned. Problem is, I am losing coolant quickly so may have a leak somewhere, and idle is hunting quite badly and I dont think the ECU has a clue what is going on...

Have been considering going to visit AFR for a while as they have a great reputation for Starlets..
 
Arnold

Arnold

Lifer
My car is being tuned at Surrey Rolling road over near Thorpe park which isn't too far from you.

Also, the emanage blue's are more reliable than the ultimates. I wouldn't be put off from getting one, much cheaper than stand alone. I've got one being mapped in my Glanza as we speak :)

Thirdly, i think the stock actuators lose boost pressure at high revs so that's one advantage of the HKS one. I've also got one being fitted! Glad you have noticed some improvements cos i can't wait until mine is done
 
T

Taylor

Member +
danb87 said:
just fitted my hks actuator, with no assistance from my mechanic, all went smooth. used the measurement guide for it, an did it for .8 bar took it for a drive an very noticiable. i have a fcd fitted an i didn hit fuel cut which im guessing is on the right setting. also have the fpr an fmic.

will be gettin it setup on the rollers very soon, any recomendations on which one too use? something fairly local too my post code, rh1.

cheers too vinniegt for the actuator aswell mate


:)
Click to expand...

Get it done were i got mine done Enhanced peformance just down the m23 towards brighton turn off at the cowfold turn offf and its next to a petrol station that sells any fuel you want lol
 
You must log in or register to reply here.
Top