koni shocks

[Starletfreak]

Guys i bot some koni suspenson and i was wondering how to adjust the rear cause it seems my car's rear is too high and since it is written on the shocks(top adjustable and having a allen key hole on top of the shock,well it must be adjustable..

So any info guys how to make my rear lower cause i have 4 same height lowering spring!!!

 

[Dave.]

Pretty sure that won't make any difference, the Koni's have adjustable damping, you can't adjust the height, can you?

Almost all starlets sit slightly higher at the back, its just how they all seem to be setup. Mine is the same (quite noticable, but only because I have no interior at all)...

Dave

 

[lleey2k4]

Like Dave says.

You can't adjust height, its just the way Starlets sit. Mine seemed to be only noticable when it was stripped out.

As far as i know Koni's are just adjustable for Soft, Medium and Hard settings.

 

[richglanza]

i have a set how do u adjust the fronts too,

and also setting them up so they are even

what do people recommend as a god set up for them

all even or softer fronts to rears??? thankyou

 

[Dave.]

You have to remove the front ones to adjust them, only the rear can be adjusted on the car.

I'd imagine more or less all the same would be good, as for the settings, Its all down to the style of driving and the cars use/quality of roads around you too I'd think.

Dave

 

[Starletfreak]

rear

thanks guys,but i think mine is way too high at the rear..i think i should stick with it like that then

 

[y3Lo]

You have to remove the front ones to adjust them, only the rear can be adjusted on the car.

I'd imagine more or less all the same would be good, as for the settings, Its all down to the style of driving and the cars use/quality of roads around you too I'd think.

Dave

you have to remove the rears to adjust them, the fronts are adjustable on the car, you get a little plastic tool to adjust the fronts, the rears have to be taken off, depressed then you turn them to stiffen them.

 

[Dub-Se7en]

you have to remove the rears to adjust them, the fronts are adjustable on the car, you get a little plastic tool to adjust the fronts, the rears have to be taken off, depressed then you turn them to stiffen them.

correct, the fronts adjust by turning the triangular screw on the top of the damper, the rears have to be taken off and depressed all the way in then rotated

 

[Rory]

The rears can also be height adjustable.

there is a ring on the body, that can be moved in 2 positions

 

[Starletfreak]

depressd

Does that mean pressd all the way down the adjusting it...help guys?

I cant see the two position,i see only one where the ring sits for the spring

 

[y3Lo]

ye take the spring off, press it all the way down then rotate it, cant remember which way though, should say in your instructions

 

[Dave.]

Woops my bad, I knew it was one or the other :homer:

Dave