Levin Twinpot {PIC'S}

[billybob]

2002- Corolla Diesel

they were 277x23mm I believe - I didn't think the BZR discs are THAT thick though

bzr dics are thicker

 

[riko666]

I stand corrected

 

[Vapor]

spacers 6 mm and bolt on
good brakes, you have reinforced hoses

 

[adam]

looking at your pic,it looks like your disc is sitting flush with the hub where the wheel mounts? is that right?

 

[hardcoreep]

2002- Corolla Diesel

they were 277x23mm I believe - I didn't think the BZR discs are THAT thick though

Those rotors can't be 277mm in diameter and work in the stock location. BZR rotors are 275mmx25mm. You have to either cut them down to the 254mm or make an adapter plate to mount the caliper the inch higher.

http://hardcore.ep91.com/sus_ssbrakes.html

The BZR rotor has a deeper hat than the EP82/91 requiring the spacer to correctly center the rotor in the caliper. This is why you need the longer studs.

 

[riko666]

they were milled down to 260mm Rory

 

[hardcoreep]

they were milled down to 260mm Rory

Thanks. That should have been stated at the very beginning.

 

[whiteglanzav]

looking at your pic,it looks like your disc is sitting flush with the hub where the wheel mounts? is that right?

yes mate thats right !!