My Glanza v 280bhp @Flywheel at 1.4 Bar.

Sam_Brian

Fresh Recruit
The Glanza !!

178962_366444940070768_96509803_n.jpg

552036_342782609103668_119067705_n.jpg


577722_342782772436985_100001157967315_858526_261282286_n.jpg



Heres a list of the modifcations been done to it guys !!

Tunning Developments Stage 2 Rebuilt Engine.
-Wossner 74.5mm Low Compression Piston Kit with Rings and Pins
-Scat 4EFTE Forged Conrod Kit with ARP Rod Bolts
-Athena 1.2mm Uprated Metal Headgasket
-ARP 2000 Uprated Headbolt Kit inc New Washers
-Genuine Toyota Full Gasket Kit
-Genuine Toyota Oil Pump Kit
-OEM Water Pump Kit
-OEM Cambelt Kit inc Idler & Tensioner
-ACL Main Bearing Kit
-ACL Big End Bearing Kit
-ACL Thrust Washer Kit
-Fully Machined and Polished 4EFTE Bottom End
-Fully Stripped, Cleaned and Rebuilt 4EFTE Cylinder Head to Standard Spec
-Wepr TD04 turbo
-Tm-Developments oil & water line kit
-Wepr externally gated manifold
-Wepr downpipe (decat)
-Tial 38mm waste gate with Screamer pipe
-Half size civic rad
-Rx7 460cc Injectors
-Braided fuel return line
-Trd Oil Filter Cap
-Magnecore ignition leads
-Tuning developments fuel pump
-Emange blue piggy back ecu (fitted and mapped by tuning developments)
-Excedy Paddle clutch
-Chrome dipped rocker cover
-Chrome dipped inlet manifold cover
-Lots of samco hosing
-Forge dumpvalve
-Front mounted induction kit
-J-Peformance front mounted intercooler
-Poweflex engine mounts (all 3)
-Custom 2.5 inch straight through exhaust system
-Clear cambelt cover
-DEI titainium heat wrap
-K&N air filter

Suspension - Wheels - Breaks

-Brand new 15" rota grid drifts & Yokie parada spec2 tyres
-3g Discs on front (neW)
-Red stuff pads on front (new)
-OEM rear dics and pads
-D2 Coilovers

Car is Running 280 Bhp @ Flywheel at 1.4 Bar On Dyno Dyamics!!

More mods to come !!

Ok guys Got Some updates for you !!

Had to replace the WEPR TD04 due to the manifold being cracked everywhere and it was ceased to turbo so didnt want to shear the bolts when taking it apart.... so thought.... hmmmm Time for bigger turbo see went and got this badboy !!
543548_363858996996029_12447297_n.jpg

181045_363858850329377_357814869_n.jpg

45294_362831847098744_1810170360_n.jpg

TD05 16g :D
Getting It changed to external for the SCREAMMMERRRR !!

Also decided to get this :)
535458_346648492050413_100001157967315_866015_2005688232_n.jpg


Dual breather Cam cover :)


the Car is currently down at The Best "Tunning Developments"
Getting their ..
-OWN Camshafts fitted
-Turbo fitted and converted to external
-Dual Cam Cover fitted
-Remap it all :))

So we Are hoping for well over 300 BHP... LEts see what the guys can do :))

(Mods to cum)

-TD Intake Manifold
-SLIP DIFF!!!!!
-KSPORTS!!!!


.. Then
-760cc Injectors
-TD Fuel rail

Thanks Again to Tunning Developments..
BEST JAP TUNERS IN UK !!!

15/7/2012

Ok guys we went a bit mental after buying the td05 and decided to go
WEPR GODZILLA Stage 2 kit
With 316 Stainless steel Top Mounted manifold



So The spec list that is getting done as we speak is :

-Quaife ATB
-Genuine Toyota Diff Bearings
-Remove & Refit Gearbox
-Strip & Replace Differential
-Fit Rocker Cover & Hoses/Fittings
-TD Camshafts
-TD Valve Springs
-Remove & Refit Cylinder Head
-Porting Work to Cylinder Head
-Strip Down & Rebuild Cylinder Head
-Athena 1.4mm Headgasket
-Wolf V4X Plugin Kit
-TD Mapping Session - V4X
-Ksport 6 Pot Brake Kit (Black)
-ID1000 Injector Set
-SPEC Clutch Kit - Stage 4
-Fit the GODZILLA !!!
-Engine Coolant
-Monster Triple Radiator
-DSD Boost, Water Temp, Oil Temp & Oil Pressure gauge

so all in that all comes to around £10000

We are hoping to knock out well over 380-400BHp from this Guyys !!

Will keep you all posted with Updates Once car is back with us on the 28th of july

Cheers !
 
Last edited:

Rev

Member +
Nice to see all your mods posted car looks great , look forward to seeing a dyno sheet as well.
 

Arnold

Lifer
I like that blue bordering type look at the front, very nice. What more are you planning to do to it?
 

Sam_Brian

Fresh Recruit
yup we are planning on stripping it once its back... everything out the inside lol :)

Keep u all posted :)
Vids and pictures to come !!
 

GlanzaTD04

Member +
mate, just read your post and you had exactly the same build by them as i did and exedy paddle clutch is the same as mine but my thrust bearings have died, apparently all down to my aggressive clutches fault...but you have the same?! is yours all run in? did you have any oil pressure problems with yours?
 

Sam_Brian

Fresh Recruit
mate, just read your post and you had exactly the same build by them as i did and exedy paddle clutch is the same as mine but my thrust bearings have died, apparently all down to my aggressive clutches fault...but you have the same?! is yours all run in? did you have any oil pressure problems with yours?

Hi mate.. And yup its ran in got a good 4000 Miles on it now and no problems at all.. Clutch is sound etc
and no problems with the oil pressure... Nick and Mike are "Gods" when it comes to That kinda stuff buddy !
 
Top