Hey guys I seriously need some help. I took my car in for a head gasket and water pump replacement. After the guys finished the car (ep82) didnt want to start. After searching we found that there is no pulse on the injector plugs. When ignition is on, the positive wire works, but nothing we do gets the earth wire, which we assume sends the pulse, to work. I get an error code 22, but seems that has nothing to do with the injectors.
If we disconnect only one injector plug, both its wires give power. We're really stuck here, dont know what to do. I see on the ecu there is 2 pins for the injector pulse. Can I run a wire from those pins directly to the injectors, bypassing any bad wiring? And where is the ecu located?
Please guys, I really need my car, I'm desperate! Thx!
If we disconnect only one injector plug, both its wires give power. We're really stuck here, dont know what to do. I see on the ecu there is 2 pins for the injector pulse. Can I run a wire from those pins directly to the injectors, bypassing any bad wiring? And where is the ecu located?
Please guys, I really need my car, I'm desperate! Thx!