Part number needed please!

[shorestyle]

I need the part # for the thermostat housing studs. Went to go replace my thermostat and both studs snapped. Studs are for a 4e-fte mkII (94) ep82 gt. Need ASAP. Much appreciated.

 

[Rory]

92122-60616 is the part # from the Toyota EPC.

Rory

 

[dark_knight]

sorry about that mate. just curious; they snapped from the bolt-head or at the block..?

 

[shorestyle]

They snapped right inside the nut. So there's still about an inch - inch 1/2 of stud sticking out of the block still.

Thanks Rory!

 

[dark_knight]

i've only had to deal with snapped studs on my down-pipe exhaust joiner if i may call it that, the one right after the cat-convertor housing on a stock setup and they were a pain in the wrong places to deal with - even with the unit off the car. i can imagine what you'll have to do for yours. i sawed off & drilled mine out but in your case, you may want to weld some leverage onto them then pry them out using that..

 

[corofin12345]

ya one snapped on me a few months back.. tiny little no gooders

 

[dark_knight]

@corofin12345: how did you fix your snapped studs..?

 

[JasonGlanza]

www.toyodiy.com for part numbers mate