puntoturbo
Fresh Recruit
Recently i rebuilt my EP82 lump with scat rods and slightly oversize wiseco pistons. After around 500 miles the engine started to knock slightly, i put this down to a big end knock. Today i removed the sump and found this on No1 conrod/cap:
The crank was reground and slightly oversized AE .25 big end bearings were fitted. All the engine was airline cleaned before being assembled, all oil ways were cleaned etc
Any ideas what could cause this, possibly something being picked up in the oil?
Thanks
The crank was reground and slightly oversized AE .25 big end bearings were fitted. All the engine was airline cleaned before being assembled, all oil ways were cleaned etc
Any ideas what could cause this, possibly something being picked up in the oil?
Thanks