Race Spec rocker cover!

[Liam_D]

Hey guys just wondering how you have set your race spec rocker covers up. picked mine up yesterday should hopefully be fitting it next weekend.

Is it just a case of venting of the rocker breathers to a catch tank and then porting the catch tanking to the atmosphere? Or can you run it safely with a 2port catch can?

Also is there anyway of blocking off the old PCV valve hole on the inlet or is that just best to be blocked off.

Thanks guys
Liam

 

[matt walters]

Im gonna put both breather pipes to a t peice then to the can and then a pipe from the can down to the back of the gear box so it drags the vapours out

As for blocking old one off i previously used heat shrink and squeezed the shrink together for a good seal

 

[Ant]

Not much point of 'venting' the breathers to a can. Just run them down the back of the block to 'vent to air'.....

 

[Liam_D]

Catch can looks much nicer though dont it. Anymore input?