Removing bits around engine....Pic's inside...

sanchez

sanchez

Member +
mate take some pics of the same areas of the first pics you took so we can compare please :)

Good idea, im going to do this too, repped :beer:
 
Stulet-GTT

Stulet-GTT

Member +
Some pic's for ya sanchez...

First pic..
DSCF0614.jpg


This what i done with pipe...
DSCF0621.jpg


Dunno what the little black box is but it save fume's jus venting out into bay..

Then this little lot..
DSCF0617.jpg


Now look's like this...
DSCF0622.jpg


And these pipe's...
DSCF0616.jpg


Now like this...
DSCF0623.jpg


Wanna see if i can pull them out then plug hole properly with little bolt, the pipe with screw in end is just tempry...

Overall look ATM...
DSCF0620.jpg


Will look better once all cleaned..
 
Mike_ep91

Mike_ep91

Member +
Matt Glanza said:
yea you can rip all that out.the outlets on the mani though blank them off individually as if you loop the may cause a high eratic idle like a vacum leak.with regards to the pipe going to the canister all i did was put a breather on the end of it as a temp.didnt have the bottom pipe on mine goin to the other box
Click to expand...

Think im going to be taking out all this stuff aswell to help clean up the bay a bit. Was looking at the pipe going to the canister and it looks as though I only have the one pipe, so can this be vented into the bay or what can be done as I dont think ep91's have the little black box which is shown in the pics.
 
M

Motor

Member +
Mike_ep91 said:
Think im going to be taking out all this stuff aswell to help clean up the bay a bit. Was looking at the pipe going to the canister and it looks as though I only have the one pipe, so can this be vented into the bay or what can be done as I dont think ep91's have the little black box which is shown in the pics.
Click to expand...

As far as I'm aware; and from a quick google; you can leave that pipe venting to the atmosphere. Don't block it though as it can apparantly cause excess pressure in the fuel tank. Can fubar the fuel pump along with other less pleasant outcomes.
Going to give it a go at the weekend myself so will post how it goes.
 
Stulet-GTT

Stulet-GTT

Member +
Mike_ep91 said:
Was looking at the pipe going to the canister and it looks as though I only have the one pipe, so can this be vented into the bay or what can be done as I dont think ep91's have the little black box which is shown in the pics.
Click to expand...


They say the fume's come out once canister removed, so if ya wanna save the smell coming in to car maybe put a longer hose on so it vents under the car...
 
-BenGTTurbo-

-BenGTTurbo-

Member +
That black tank thing that looks like a big fuel filter.. What is that and what does it do ??? is it ok to take that all out and block off the holes on the TB ??
 
Stulet-GTT

Stulet-GTT

Member +
RGM1800 said:
does it still produces fumes even though i looped the lines like what you did?
Click to expand...

Nope no fumes so all seems ok...

glanzadude said:
If you are cleaning the engine bay why don't you move your battery to the boot aswell????
Click to expand...

I have thought about this but i wouldn't know where to start...

-BenGTTurbo- said:
That black tank thing that looks like a big fuel filter.. What is that and what does it do ??? is it ok to take that all out and block off the holes on the TB ??
Click to expand...

Have a good read threw the hole thread mate an you will find all the answer's you will need to remove it...
 
Mark-ep91

Mark-ep91

Member +
rep added for the info mate gonna try clean up my bay tomorrow if i can remove more stuff keep it coming:rockon:
 
glanzadude

glanzadude

Lifer
Battery in boot

I really cannt see it being that hard.just get a set of jump leads and feed the red cable from the engine to the boot,bolt down the battery and and find a good earth (Ie) bolt on coilovers...shouldn't be more then one hour to do and will add a bit of life when the boot is open :rockon:
 
TomS

TomS

Lifer
I've just done this, took about half an hour, tidied up the bay a bit and saved a little weight.

I love free mods.

Rep added
 
danb87

danb87

South East England Area Rep
anyone know where too get the right cable too put the battery in the boot. not sure what sort of cable too use.

any helps repped as always thanks.
 
You must log in or register to reply here.
Top