Removing on standard ecu

[alanep70]

How can i remove the fuel cut on my standard 4efte computer. With out using FCD.

 

[lanxter]

as far as im aware you cant other than getting a piggy back ecu.

many people have tryed but as far as i know no ones cracked the EP82 ecu

 

[EH@B]

i dont think also u can do that
if u dont want to get FCD then u must get stand alone or piggy back ECU

 

[munday]

You just need to limit the voltage from the map sensor, either using a zener diode or resistor (fuel cut occurs when the voltage goes above 4.15v) or you could bleed off some of the pressure going to the map sensor when it comes on boost.

Any of these will make your car run leaner than standard, so AFRs would need to be checked and possibly modified.

:drive: