Rev limiter wiring

[huwr]

On an omex rev limiter with three wires; earth, coil positive and coil negative, which pins on the ECU could connect to the wires marked coil positive and coil negative?

Also do starlets use twin coil or single coil ignition systems?

Thanks

 

[huwr]

Any ideas where I could tap the coil negative and coil positive wires in to?

 

[10secGT]

can i ask why you would want to do this? as all you will be able to do is lower the rev limit? and is it a gt or a glanza?

 

[dantheman]

pos can go to any ignition live, and the neg needs to go to the negative wire on the coil plug (theres a 2 wire plug that goes onto the coilpack with pos/neg)

 

[huwr]

can i ask why you would want to do this? as all you will be able to do is lower the rev limit? and is it a gt or a glanza?

I have a mine's ecu where the rev limit is set too high for my liking.

 

[huwr]

pos can go to any ignition live, and the neg needs to go to the negative wire on the coil plug (theres a 2 wire plug that goes onto the coilpack with pos/neg)

Thanks. rep added.