setting fuel for 1bar and using a hks FCD

S

seanio

Fresh Recruit
moneys tight so not getting piggy back just yet, hence fitting the above,

just a few Q's first,

as above, will be fitting a FPR and looks like a hks FCD as i cant find a jam one,,

whats the stock fuel pressure? and whats people running when setting boost to around 1bar?

who all uses the hks fcd? are you wiring them into the ecu or at the map sensor like the jam tututol shows?

i noticed on the hks fcd there different setting it can be set at, whats this for and what should it be set to ?

cheers for any info

sean
 
M

Mike@TD.co.uk

Registered Trader <a href="http://www.Tuning
Stock fuel pressure is ~2.2bar. I would strongly recommend getting the fueling setup via a wideband sensor and not just using guesswork :)
 
ChrisGT

ChrisGT

Member +
Sigh...I swear there's about 5 of these threads a day now! lol

Stock fuel pressure = 2.3Bar(ish)

HKS has different settings; lower the setting the more lean and more boost you can run past fuel cut.

Set your boost to 1Bar and guess the fuel pressure - let us know when you melt a piston! (Or you could spend £40 and get it set-up so its safe...its up to you!)
 
S

seanio

Fresh Recruit
ChrisGT said:
Sigh...I swear there's about 5 of these threads a day now! lol

Stock fuel pressure = 2.3Bar(ish)

HKS has different settings; lower the setting the more lean and more boost you can run past fuel cut.

Set your boost to 1Bar and guess the fuel pressure - let us know when you melt a piston! (Or you could spend £40 and get it set-up so its safe...its up to you!)
Click to expand...


what you being a wank for ?

whats wrong in asking for these etails so i can atleast run my car to check fueling on a rr,
 
dac69er

dac69er

Super Moderator
seanio said:
what you being a wank for ?

whats wrong in asking for these etails so i can atleast run my car to check fueling on a rr,
Click to expand...

it is asked stupidly regularly mate. im pretty tolerant and just let these threads go myself, but some people get annoyed.

do a search mate. been covered plenty of times.

set to 3 bar and be light on the right foot until its been checked out
 
S

seanio

Fresh Recruit
dac69er said:
it is asked stupidly regularly mate. im pretty tolerant and just let these threads go myself, but some people get annoyed.

do a search mate. been covered plenty of times.

set to 3 bar and be light on the right foot until its been checked out
Click to expand...

hi mate sorry im quite new to this site, how do i do searches?
 
ChrisGT

ChrisGT

Member +
seanio said:
what you being a wank for ?

whats wrong in asking for these etails so i can atleast run my car to check fueling on a rr,
Click to expand...

How am I being a wank? You asked some questions, I answered some of them and made a small statement about how often these threads come up. I also gave you some advice; get it set-up properly to be safe.

Chill your bean. Search and you'll probably find all the info you could ever need...
 
S

seanio

Fresh Recruit
Mike@TD.co.uk said:
Stock fuel pressure is ~2.2bar. I would strongly recommend getting the fueling setup via a wideband sensor and not just using guesswork :)
Click to expand...

hi mate live 6miles from a rr so will be getting checked there but no transport other than th car itself so need to get it somhow lol
 
Derek

Derek

Lifer
Its been covered a zillion times a week mate, if you use a search button on the toolbar there. Loads of info in there.
 
Derek

Derek

Lifer
seanio said:
cheers ill remember to use this part of the forum before i post new threads

sorry guys

sean
Click to expand...

Don't be afraid to ask mate just if you think its a common question try a search if you find nothing post a thread up you'll get an answer. welcome to the site btw.
 
TomS

TomS

Lifer
seanio said:
who all uses the hks fcd? are you wiring them into the ecu or at the map sensor like the jam tututol shows?
Click to expand...

Either or mate. It's better to wire it into the ecu because it could get wet and malfunction under the bonnet
 
C

Corey_gt

Admin
seanio said:
moneys tight so not getting piggy back just yet, hence fitting the above,

just a few Q's first,

as above, will be fitting a FPR and looks like a hks FCD as i cant find a jam one,,

whats the stock fuel pressure? and whats people running when setting boost to around 1bar?

who all uses the hks fcd? are you wiring them into the ecu or at the map sensor like the jam tututol shows?

i noticed on the hks fcd there different setting it can be set at, whats this for and what should it be set to ?

cheers for any info

sean
Click to expand...

:cool:
 
You must log in or register to reply here.
Top