does any 1 no wer i can get a shorend hot pipe for ct9?
Texx Super Moderator Feb 8, 2012 #3 joshhayat said: does any 1 no wer i can get a shorend hot pipe for ct9? Click to expand... For the turbo in the stock position or with the compressor housing rotated? If it's rotated, I used the stock compressor outlet pipe, just chopped it down and welded it back together.
joshhayat said: does any 1 no wer i can get a shorend hot pipe for ct9? Click to expand... For the turbo in the stock position or with the compressor housing rotated? If it's rotated, I used the stock compressor outlet pipe, just chopped it down and welded it back together.
J joshhayat Fresh Recruit Feb 8, 2012 #4 turbo is in stock position. is there a thread on how to rotate?
dac69er Super Moderator Feb 8, 2012 #5 remove the big circlip holding the compressor housing on. remove housing (carefully). remove locating pin. put a small amount of grease on the Oring to aid refitment. push housing back on (carefully). rotate to desired position. refit circlip
remove the big circlip holding the compressor housing on. remove housing (carefully). remove locating pin. put a small amount of grease on the Oring to aid refitment. push housing back on (carefully). rotate to desired position. refit circlip
dac69er Super Moderator Feb 8, 2012 #7 Texx said: Be prepared though, that circlip can be a complete wanker. Click to expand... oh yes. same setup as the TD04 and that is equally as terrible
Texx said: Be prepared though, that circlip can be a complete wanker. Click to expand... oh yes. same setup as the TD04 and that is equally as terrible
M mork Member + Feb 8, 2012 #8 Sorry to hijack the thread, but can the standard bov still be used if the housing is rotated?