some input on this aftermarket intake

[billybob]

some input on this aftermarket intake,what sort of tps do i need to run with this setup.apexi power fc as mangement.will it be an automatic tps or something not to sure

 

[billybob]

any ideas lads think it an mr2 one ,how can i run this do i just need an mr2 one to run it

 

[speedfreaq]

the auto TPS should work on this

 

[HYBRID]

u need a "D" type throttle body, so that the tps can fit right on without having to machine anything.. as otherwise you wont be able to tune propperly. some include: nissan pulsar, skyline gts series, supra 5m sierra cosworth..

those are the only 60mm throttle bodies with "d" type shafts i can think of.

the one in that pic wont work propperly unless you machine/fabricate a new shaft, which in all honesty isnt worthit.

Kon

 

[billybob]

u need a "D" type throttle body, so that the tps can fit right on without having to machine anything.. as otherwise you wont be able to tune propperly. some include: nissan pulsar, skyline gts series, supra 5m sierra cosworth..

those are the only 60mm throttle bodies with "d" type shafts i can think of.

the one in that pic wont work propperly unless you machine/fabricate a new shaft, which in all honesty isnt worthit.

Kon

il have to look into this more cheers

 

[Sheldon]

im not really sure.. but i think power FC can run with an auto TPS? and that looks like it can take an auto tps..

 

[billybob]

im not really sure.. but i think power FC can run with an auto TPS? and that looks like it can take an auto tps..

thanks for the input sheldon,,what sort of a auto tps should i be looking for on what car ?

 

[Sheldon]

thanks for the input sheldon,,what sort of a auto tps should i be looking for on what car ?

hmm was thinking of the EP91 Auto one.. but now that im looking at pictures its a bit different

but probably if you twist a bit that two bits it will fit fine.. and some moding to where it needs to screw.

part number

89452-22090

 

[billybob]

Sheldon thanks again il get some more input on this as the day goes on cheers

 

[Chris@CCM]

auto tps wont work to well with the pfc u can change any tps setings really pal but u might be able to work somthing

 

[billybob]

auto tps wont work to well with the pfc u can change any tps setings really pal but u might be able to work somthing

so mybe just get the mr2 one that for the body then

 

[ramses974]

the TPS looks like an european 5EFE paseo...it seems exactly the same that was in my car ...
Meanwhile i have seen 3 type of tps with NA manual paseo

 

[billybob]

the TPS looks like an european 5EFE paseo...it seems exactly the same that was in my car ...
Meanwhile i have seen 3 type of tps with NA manual paseo

any more input?

 

[gedis]

i run exact manifold with power fc, burwash tb, and stock glanza manual tps with no isue, made it all fit at home without any machining, done it couple years a go, but as far as i remember i had to open tps and make new holes in it to bolt to tb, and adjust it after, then cover back on

 

[billybob]

i run exact manifold with power fc, burwash tb, and stock glanza manual tps with no isue, made it all fit at home without any machining, done it couple years a go, but as far as i remember i had to open tps and make new holes in it to bolt to tb, and adjust it after, then cover back on

cheers lad

 

[billybob]

ok fellas just a question when i get this intake on will the car idol ok as the control
vavle from the standerd intake will be gone ?

 

[billybob]

any input fellas might be fitting it tomorrow

 

[weeJohn]

Will do with the FC mate.

Looks shite that mani but, I will give you £50 for it lol.

 

[billybob]

Will do with the FC mate.

Looks shite that mani but, I will give you £50 for it lol.

it might take you up on that offer :haha::haha:

 

[billybob]

which ones are the water lines on mr2 throttle body
rep for help cheers