Td05 20g

[Bullet00th]

For sale: TD05 20G

Item Condition: Unknown mileage, rebuild wouldn't hurt

Price and price conditions: £150

Extra Info: Came off a Scooby making 360bhp ATF @ 1.5bar, now is clocked for a Starlet. Had it fitted to mine, was getting full boost (1.5bar) just after 5k. Turbo pulls very hard!!!

Pictures:

Contact Details: PM or 07794418473

Location: Warrington, Cheshire

Delivery & Conditions of Delivery: £5

 

[Dan-The-Glanza-Man]

was that on a 4e just after 5k whats shaft play like and was it smoking ??

 

[Captain Starlet]

Is there much difference to the 16g with these in pull i mean?

At 1.5 bar mines bout 5k

 

[Bullet00th]

was that on a 4e just after 5k whats shaft play like and was it smoking ??

That was on a forged 4E with standard compression. Shaft play is minimal. Was abit of smoke on idle but wasn't sure if it was valve stem seals or the turbo...?

Matt

 

[Bullet00th]

Is there much difference to the 16g with these in pull i mean?

At 1.5 bar mines bout 5k

The 20g uses the same exhaust housing as the 16g, which means the lag is the same but the power output is alot more! This turbo does pull very hard!! Had it mapped at Tuning Developments and Nick said he was impressed with the turbo. It pulls its hardest in 4th and 5th

Matt

 

[popsy09]

Is there much difference to the 16g with these in pull i mean?

At 1.5 bar mines bout 5k

any idea how fast it would boost past 1 bar , on mine which is not mapped yet i got 1 bar at 4800 just looking for what i would get 1.6 bar at roughly ??

 

[Captain Starlet]

any idea how fast it would boost past 1 bar , on mine which is not mapped yet i got 1 bar at 4800 just looking for what i would get 1.6 bar at roughly ??

i get 1.5 bar at 5k mate and pulls like mad to the limiter.

With these turbos its like said 4th and 5th where they shine

 

[Bullet00th]

any idea how fast it would boost past 1 bar , on mine which is not mapped yet i got 1 bar at 4800 just looking for what i would get 1.6 bar at roughly ??

If I remember when I had mine, after 1bar it spooled very quickly. Within 200revs probably

Matt

 

[popsy09]

If I remember when I had mine, after 1bar it spooled very quickly. Within 200revs probably

Matt

thanks exactly what i was looking for should get it down to about 5k so for full boost once mapped , thanks and glws very nice turbo

 

[Shorty]

is the gate welded shut or will it run of an actuator??

 

[Bullet00th]

is the gate welded shut or will it run of an actuator??

The wastegate flap is welded shut on this one, but can be made to run off actuator if needed

Matt

 

[Bullet00th]

bump

 

[Bullet00th]

£Offers£

 

[Bullet00th]

Last Chance Offer of £95 before I put it on eBay

Matt

 

[Fizturbo]

Bargain! for sum one,
I would be intrusted but i have TD04 and a spare as back up which am happy with.

 

[somal]

too far away to purchase

 

[glv013]

hi,

can you ship to malta europe and what about the cost?