tool for crank bolt

[Spoonz]

anyone got one? Need it before weekend

 

[dac69er]

what one do you mean? if its the one cambelt end then its either a 14 or 17mm socket size. nothing special

 

[Spoonz]

bump

 

[MARK@CMBAUTOS]

bump

19m socket

 

[weeJohn]

Put a 19mm soket on the bolt, and a long bar over the socket facing the front of the car and near the ground.

Take the king lead off and turn the engine over with the key. The bar will hit the ground and the engine will keep turning loosing the bolt.

 

[dac69er]

Put a 19mm soket on the bolt, and a long bar over the socket facing the front of the car and near the ground.

Take the king lead off and turn the engine over with the key. The bar will hit the ground and the engine will keep turning loosing the bolt.

you have to be extra careful doing it that was as a flailing bar isnt fun

i do it with the car on the ground and with it in gear and the brakes on to stop the engine moving.