Tuning e-manage for bigger injectors

D

deangtturbo

Fresh Recruit
Please can someone help.
I originally had the emanage tuned and running with the standard injectors. I have now upgraded the injectors to 460cc ready for my td04 kit coming soon. Im having trouble setting the right fuel required using the emanage. It wont start because cos its probably overfueling like crazy.
Iv done the automatic calculater in the parimeter settings(290cc to 460cc) but it dont seem to have helped much. Is there any other things i have to do on the emanage for it to downscale the fuel the 460's are providing?
Thanks
 
G

GTdan

In The Closet
if i was you, book it in for a tuner, refit the standards and let the tuner fit and map it correctly, as your afrs are gonna be all over the place, and probly do more harm than good.
 
F

FeNder

Member +
well which emanage is it , and if ultimate , which version of the ultimate ?
have you got a wideband ?
 
D

deangtturbo

Fresh Recruit
its emanage blue, yes i have a wideband. its not much good if the car wont run though isit? although it did start yday for a short period and it didnt sound too healthy(sounded like it was missing), wont start up since.
 
goldenvtr

goldenvtr

Member +
are you sure the injectors are working fine? try giving them a light tap withascrew driver, they maybe stuck closed (if by rough you mean it was only running on 2/3 cynlders)
 
D

deangtturbo

Fresh Recruit
yeh funny yo should mention that because i took the spark plugs out after a few attempts of starting. The spark plugs were wet apart from the fourth one, it was bone dry. That suggests its not working then doesnt it?
 
goldenvtr

goldenvtr

Member +
deangtturbo said:
yeh funny yo should mention that because i took the spark plugs out after a few attempts of starting. The spark plugs were wet apart from the fourth one, it was bone dry. That suggests its not working then doesnt it?
Click to expand...

yup, happend to me when i fit a set agggggges ago ,but a light tap sorted it out:)
 
A

Adam_Glanza

Member +
deangtturbo said:
Please can someone help.
I originally had the emanage tuned and running with the standard injectors. I have now upgraded the injectors to 460cc ready for my td04 kit coming soon. Im having trouble setting the right fuel required using the emanage. It wont start because cos its probably overfueling like crazy.
Iv done the automatic calculater in the parimeter settings(290cc to 460cc) but it dont seem to have helped much. Is there any other things i have to do on the emanage for it to downscale the fuel the 460's are providing?
Thanks
Click to expand...

you have probably flooded the engine, that happened to me in pretty much the same situation when i drove home before getting tuned.

i moved the car very slightly off my drive into the road then stopped and it wouldnt restart.

try cleaning the plugs up and see wat happens
 
You must log in or register to reply here.
Top